|
What type of gateways do you have on the two networks? Can you use forwarding queues on these gateways. I have a client which I support from my office. The client and I have private subnets. The AS/400 at the client site has same IP address as my iSeries 270 (192.168.1.250) Both the client and I use Linux PCs as our internet gateways. The Linux gateways have been congigured to print to the remote site using the Linux apsfilter. Linux can quite easily be configured to print to a remote machine. My client's gateway server has been configured with a forwarding queue that prints to the AS/400 system printer, PRT01. I use IP printing on my iSeries to print to the forwarding queue on my Linux gateway. This in turn forwards the print my client's gateway server, which then forwards the output to the system printer. I have set this up to allow printed output to go in both directions. It works like a charm! Needless to same the firewall at both sites need to be configured to allow this traffic through. We both have fixed internet IP addresses, so each firewall has been configured to only accept this type of input from our own IP addresses. Using dynamic IP addresses fot the internet connection could make this process difficult to set up. I don't know if this is useful to you, but this was how I solved this problem. Syd Nicholson Castlehill Computer Services Ltd. Quoting Jerome Draper <jdraper@trilosoft.com>: > Ahaaa! > > Since I am on a 192.168.1.0 network in my office and the network I am > dialing into is on the same there is a conflict. > > Here's the route print > > > > Active Routes: > > Network Address Netmask Gateway Address Interface > Metric > 0.0.0.0 0.0.0.0 192.168.1.101 192.168.1.101 > 1 > 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 > 2 > 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 > 1 > 192.168.1.0 255.255.255.0 192.168.1.11 192.168.1.11 > 2 > 192.168.1.0 255.255.255.0 192.168.1.101 192.168.1.101 > 1 > 192.168.1.11 255.255.255.255 127.0.0.1 127.0.0.1 > 1 > 192.168.1.101 255.255.255.255 127.0.0.1 127.0.0.1 > 1 > 192.168.1.255 255.255.255.255 192.168.1.11 192.168.1.11 > 1 > 208.25.82.88 255.255.255.255 192.168.1.1 192.168.1.11 > 1 > 224.0.0.0 224.0.0.0 192.168.1.101 192.168.1.101 > 1 > 224.0.0.0 224.0.0.0 192.168.1.11 192.168.1.11 > 1 > 255.255.255.255 255.255.255.255 192.168.1.101 192.168.1.101 > 1 > > Active Routes: > > Network Address Netmask Gateway Address Interface > Metric > 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 > 1 > 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 > 1 > 192.168.1.0 255.255.255.0 192.168.1.11 192.168.1.11 > 1 > 192.168.1.11 255.255.255.255 127.0.0.1 127.0.0.1 > 1 > 192.168.1.255 255.255.255.255 192.168.1.11 192.168.1.11 > 1 > 224.0.0.0 224.0.0.0 192.168.1.11 192.168.1.11 > 1 > 255.255.255.255 255.255.255.255 192.168.1.11 0.0.0.0 > 1 > > Thanks for the info and solution to the puzzle. > > Jerry > > Jerome Draper, Trilobyte Software Systems, since 1976 > Network and Connectivity Specialist -- Mac's, LAN's, PC's, Linux, Sun, > and > iSeries > Representing Synapse, Nlynx, Perle, CLI, Intermate and Others ..... > http://www.trilosoft.com - (415) 457-3431 - (415) 258-1658fax - > jdraper@trilosoft.com > > > ----- Original Message ----- > From: Fritz Hayes <fhayes@spiritone.com> > To: <midrange-l@midrange.com> > Sent: Wednesday, March 06, 2002 4:28 PM > Subject: RE: what's with VPN trashing my network printer? > > > > Take a look at your routes and IP addresses when you are hooked up to > > your VPN. The VPN tunnel should only be passing IP traffic for that > > network. Provide the VPN network is different than your local > network, > > the VPN client should ignore the local traffic and permit local IP > > printing. What does your PRINT ROUTE say? > > > > > > Best Regards > > > > Fritz Hayes > > Atwater Associates > > > > <snip> > > > > | > > | I think you're right that when you're hooked up via VPN, you belong > to > > | that > > | network for the duration. I've had that happen to me here when I > work > > from > > | home. Fortunately, the printer is close by, and if I need to print > > | > > | > > | > I use MS DUN with the VPN adapter (PPTP) to establish my VPN > tunnel > > to > > | an > > | > iDSL router so I can then start a display and printer session to > an > > | AS400. > > | > If I then use MS Word or whatever PC software and try to print to > a > > | network > > | > printer it can't find the network printer. I'm on Win98SE. > > | > > > | > Seems to be ditto with Windows Explorer? > > | > > > | > Am I just on a different and mutually exclusive network? > > > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing > list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-L-request@midrange.com > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. > >
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.