|
I would verify with the dsl provider that they "fully support" what you are doing with the equipment you are doing it with. Our network guy asked BellSouth if we could install the cheaper dsl connection at a remote site in Miami, FL. They said yes. He asked - can we run VPN They said yes. He flew to Miami to install - didn't work! Asked BellSouth why. Answer - we support vpn on "our supplied routers", not your Cisco routers-you didn't ask us that! (and our routers don't support your Cisco vpn!) Morale of this story - Verify the entire setup - routers, firewall, ports for traffic, etc. jim ----- Original Message ----- From: "Chris Bipes" <chris.bipes@cross-check.com> To: <midrange-l@midrange.com> Sent: Tuesday, February 26, 2002 6:50 PM Subject: RE: VPN server > Well DSL is FAST in ONE direction. Though the upload speed is 128K or that > of the ISDN line. VPN does add lots of overhead to your network traffic. I > find DSL to be very reliable. Brand new installation was only down twice in > the first year and has been rock solid for the last 6 months. I would say > our T1 dies about once a year, well we just changed ISPs so we will see. If > the branch offices currently have internet access or need access, VPN would > be the way to go. Private FR is more secure with PtoP leased lines the most > secure you can get and be connected 24x7. I would put DSL at one location > and see how it works with VPN and add locations one at a time. > > > Good Luck > > -----Original Message----- > From: Steve Richter [mailto:srichter@autocoder.com] > Sent: Tuesday, February 26, 2002 1:19 PM > To: midrange-l@midrange.com > Subject: RE: VPN server > > > Our current topology is frame relay, cisco routers, T1 from central office > to the frame cloud, branch offices use expensive and slow 64kb/128kb > connections to the cloud. > > Any thoughts on replacing the cloud with router to router vpn over the > internet ? > > Esp where less expensive, higher speed DSL is used to connect the remote > branches to the internet. > > Is DSL too unreliable for business use ? > > Thanks, > > Steve Richter > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-L-request@midrange.com > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. > >
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.