|
I too have been having problems releasing the lan attachement, even after following the steps below. At different times, I couldn't get into the F11=configuration, and when I was there the F7=Store made no difference. It has seemed to have release it now, but I said that a week ago, and after an IPL in the week it was back to a LAN console. Regards Andy Youens >From: Philipp Rusch <Philipp.Rusch@rusch-edv.de> >Reply-To: midrange-l@midrange.com >To: midrange-l@midrange.com >Subject: Re: Ops Console, LAN: How to remove / Addition >Date: Wed, 23 Jan 2002 14:36:30 +0100 > >Hello Stefan and others, > >just a short addition to your checklist: >be sure to have the latest PTFs on your machine >as I was not able to store that re-configured console setting with F7 from >DST >it just came back and back again after the next IPL ... >although we followed exactly the same procedure as described below . >After some PTF installation we had our LAN card again. >(this hit me with my first V5R1 install, can't tell for V4R5) > >Regards from germany, Philipp Rusch > >Stefan.Tageson@intentia.se schrieb: > > > Some time ago a question was asked on how to get rid of the Operations > > Console LAN-attach in order to return the LAN-card to it's normal use. > > I haven't seen any answers yet but as this problem hit us today one way >to > > fix the problem is: > > > > Manual IPL to DST > > Work with DST environment > > Work with system devices > > Console mode > > set the appropriate console mode 1=twinax, 2=OpsConsole > > then hit F11 Configure > > enter 0.0.0.0 for ip-address and default routers and subnet mask > > press enter > > press F7 = Store > > press F13 Deactivate > > press F3 to return > > > > Be SURE to have the LAN-card connected to a hub/switch during this > > operation or DST will freeze when pressing F13 > > > > Re-Ipl the system and the LAN-card should be usable for other purposes > > again. > > > > Regards > > > > Stefan Tageson > > Intentia Consulting Sverige AB > > Propellergatan 1, SE-211 19 Malmö, Sweden > > Phone: +46 (0)40 691 35 00 > > Cell: +46 (0)733 913 813 > > Fax: +46 (0)40 691 3900 > > E-mail: stefan.tageson@intentia.se > > > > _______________________________________________ > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing >list > > To post a message email: MIDRANGE-L@midrange.com > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > > or email: MIDRANGE-L-request@midrange.com > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/midrange-l. > >_______________________________________________ >This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list >To post a message email: MIDRANGE-L@midrange.com >To subscribe, unsubscribe, or change list options, >visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l >or email: MIDRANGE-L-request@midrange.com >Before posting, please take a moment to review the archives >at http://archive.midrange.com/midrange-l. > _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.