Re: Separate subsystem - Devices not being allocated to it.

[rob@xxxxxxxxx]

We are using Symbol PTC-960SL's.  How do you tell them to use a particular
device name?  We think the name of the client is:  TELXON AIRVU

ps:  Our screen size is configurable 21 col x 16 rows

Rob Berendt
--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety."
Benjamin Franklin



                    Jim Langston
                    <jlangston@celsinc.       To:     
"'midrange-l@midrange.com'" <midrange-l@midrange.com>
                    com>                      cc:
                    Sent by:                  Fax to:
                    midrange-l-admin@mi       Subject:     Re: Separate 
subsystem - Devices not being allocated to it.
                    drange.com


                    01/17/2002 03:28 PM
                    Please respond to
                    midrange-l






Dan,

Thanks!  That did the trick.

I simply added a works station entry for QINTER for SCAN* and set it
for *ENTER.

I left everything else alone, including QINTER's workstation type entry
of *ALL.  I reset the device 10 times, and every time it has come up in
the SCANNER subsystem.  Before it was 50/50 or so.

I guess a Workstation entry with *ENTER is effectively an *OMIT for signon.

To answer your question: we are using Symbol 6842 scanners which we got
last
May.  Their screens look to be 21 characters across by 16 lines down.  They
seem to work well.

Message: 13
From: "Dan Turkeltaub" <dturk@upt.com>

jim,

we also have scanners as 5250 devices and have an interactive subsystem for
them. here's what to do...

- add a workstation entry to subsystem qinter for workstation name SCAN*,
with
an allocation at *ENTER
- add a workstation entry to subsystem scanner for workstation name SCAN*
with
an allocation at *SIGNON
- remove any workstation entries you made refering to device type.

this did the trick for us.

which scanner are you using? we have intermec 2425's, but we're looking for
an
alternative that has a bigger screen.
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.