|
Okay, if you can ping your AS/400 from your PC, or vice versa, then they can "see" each other. Lets see, your AS/400 has 2 IPs, 10.160.9.59 and 10.160.9.66. Your subnet mask is 255.255.255.0 so this means that your AS/400 should be able to "see" directly (without using gateway) any other machine in your network with 10.160.9.xxx Your PC is using DHCP so it could be getting any address, I'm assuming your DHCP is set to serve the 10.160.9.xxx subment. Can you, from your PC, PING 10.160.9.66 ? If you can, then you can see your AS/400 on your local network. How your 2 default routes are going to work is beyond me, although the default route should not come to play when talking on your local network (10.160.9.xxx). *DFTROUTE *NONE 10.160.9.254 10.160.9.59 *DFTROUTE *NONE 162.6.61.1 162.6.61.8 I believe you probably want to put a subnet mask on the second one, your TRNLINE71, but if it's working now, I wouldn't mess with it as I could be wrong on that. In short, if you can ping your AS/400 from your PC, and/or your PC from your AS/400 (run the DOS command IPCONFIG on your PC to find it's current IP address) then they can see each other. Then it's just a matter of setting up the software. --------------------------------- Short note on IP addresses, local networks, subnet masks and default gateways. Any machine that has an IP address should also have a subnet mask. It conbines these two to determine which IP's it can talk to directly (are on the local network) and which it has to use the gateway for (Wide Area Network). Your local subnet seems to be set up as 10.160.9.xx with a subnet mask of 255.255.255.0. Any IPs a machine in your local network try to contact with 10.160.9 they will try to talk to directly. If they can't find them directly, they give up. Any IP address outside of that range they will ask the Default Router to get for them. The Loopback IP address (usually defined 127.0.0.1) is an IP address that means this machine. When you connect to 127.0.0.1 or loopback you are talking to your own machine. It is sometimes called Localhost. HTH, Regards, Jim Langston From: "Dare" <oludare@ix.netcom.com> <SNIP> The following are my PC IP configuration: DNS Servers: 10.248.0.30 Node Type: Hybrid IP Address: DHCP Subnet Mask: 255.255.254.0 Default Gateway: 10.160.2.254 DHCP Server: 10.160.3.6 Primary Wins 10.160.10.37 Secondary Wins 10.160.9.37 _________________________________ The following are my AS/400 IP configuration: Internet Subnet Line Line Address Mask Description Type 10.160.9.59 255.255.255.0 ENETLIN01 *ELAN 10.160.9.66 255.255.255.0 ENETLIN02 *ELAN 127.0.0.1 255.255.255.128 *LOOPBACK *NONE 162.6.61.8 255.255.255.128 TRNLINE71 *TRLAN _________________________________ Route Subnet Next Preferred Destination Mask Hop Interface *DFTROUTE *NONE 10.160.9.254 10.160.9.59 *DFTROUTE *NONE 162.6.61.1 162.6.61.8 _________________________________ Change TCP/IP Domain (CHGTCPDMN) Type choices, press Enter. Host name . . . . . . . . . . . 'sys400' Domain name . . . . . . . . . . 'company.org' Host name search priority . . . *REMOTE *REMOTE, *LOCAL, *SAME Domain name server: Internet address . . . . . . . '162.6.5.5' '162.6.6.2' '10.248.0.30' Additional Parameters Port . . . . . . . . . . . . . . 53 1-65535, *SAME Protocol . . . . . . . . . . . . *UDP *UDP, *TCP, *SAME _________________________________ Change TCP/IP Attributes (CHGTCPA) Type choices, press Enter. TCP keep alive . . . . . . . . . 120 1-40320, *SAME, *DFT TCP urgent pointer . . . . . . . *BSD *SAME, *BSD, *RFC TCP receive buffer size . . . . 16384 512-8388608, *SAME, *DFT TCP send buffer size . . . . . . 16384 512-8388608, *SAME, *DFT UDP checksum . . . . . . . . . . *YES *SAME, *YES, *NO Path MTU discovery: Enablement . . . . . . . . . . *YES *SAME, *DFT, *NO, *YES Interval . . . . . . . . . . . 10 5-40320, *ONCE IP datagram forwarding . . . . . *YES *SAME, *YES, *NO IP source routing . . . . . . . *YES *SAME, *YES, *NO IP reassembly time-out . . . . . 120 5-120, *SAME, *DFT IP time to live . . . . . . . . 64 1-255, *SAME, *DFT ARP cache timeout . . . . . . . 5 1-1440, *SAME, *DFT Log protocol errors . . . . . . *YES *SAME, *YES, *NO
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.