Re: Command to read from a (communication) LINE

["Jerry Sprout" <mooseisacan@xxxxxxxxx>]

I have a set of CL commands that do bisync communications.  The program is
an MI program I wrote back in the 38 days.  You cannot use this program if
your AS/400 is at level 40 or higher because it crosses the domains.  I
started an attempt to rewrite this program in RPGILE.  Once I got ready to
test it, the project was benched 'cause the guy that wanted to go to level
40 got fired.  It is really a pretty simple thing.  The most complicated
part is making a connection.  That is where I was testing.  Doing
autodialing.  Let me know how you are connected (dialup, direct, leased
line).  Maybe I can get the program to work for you. (Actually, I'll get JT
to do it.) Hopefully you won't have too much need for other bisync tasks.
----- Original Message -----
From: "Shannon O'Donnell" <orion@auburnctnet.com>
To: <midrange-l@midrange.com>
Sent: Wednesday, November 28, 2001 4:58 PM
Subject: Re: Command to read from a (communication) LINE


> You'll need to create an ICF file and a program to acquire and read from
it.
>
> So the answer to your question is no, there is no CL command to read from
a
> BSC line. It's a bit more complicated than that.
>
> You might want to check out the ICF Programmer's Guide which you can find
> at:
>
> http://publib.boulder.ibm.com/pubs/html/as400/online/v4r1eng.htm
>
> Search Books with Titles for "ICF" and you'll find the book "ICF
Programming
> V4R1".
>
>
> ----- Original Message -----
> From: <jleyden@co.la.ca.us>
> To: <midrange-l@midrange.com>
> Sent: Wednesday, November 28, 2001 3:33 PM
> Subject: RE: Command to read from a (communication) LINE
>
>
> > am not an AS400 programmer,
> > is there a command (CL) that reads any data
> > from a BSC line. The AS400 BSC line is using
> > *PGM instead or *RJE as the primary program.
> >
> > Joe
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com