|
Thanks. I'll see if they think that's too expensive. -----Original Message----- From: Norbut, Jim [mailto:Jim.Norbut@Grubb-Ellis.com] Sent: Monday, November 26, 2001 1:24 PM To: 'midrange-l@midrange.com' Subject: RE: monitoring for program going in message wait For like $50 you can get MSGWATCH from Bradley Stone. That's what we did. http://www.bvstools.com I expect my commission check in the mail Brad (grin) Jim Norbut Systems Administrator Grubb & Ellis Company Phone (847) 753-7620 Fax (847) 753-9854 -----Original Message----- From: Condon, Mike [mailto:M1C@ingersoll-imc.com] Sent: Tuesday, November 20, 2001 7:45 AM To: 'midrange-l@midrange.com' Subject: RE: monitoring for program going in message wait I did too, until headquarters determined it was "not necessary/too expensive". So I get to spend $ of my time writing it myself. -----Original Message----- From: oliver.wenzel@cibavision.novartis.com [mailto:oliver.wenzel@cibavision.novartis.com] Sent: Tuesday, November 20, 2001 7:24 AM To: midrange-l@midrange.com Subject: AW: monitoring for program going in message wait I would consider using a tool like Messenger Plus.. > -----Ursprüngliche Nachricht----- > Von: Condon, Mike [SMTP:M1C@ingersoll-imc.com] > Gesendet am: Dienstag, 20. November 2001 14:32 > An: 'midrange-l@midrange.com' > Betreff: RE: monitoring for program going in message wait > > Here is what I came up with. Not real pretty, but it works. It sends smtp > mail and the remote command stuff sends out a page. It runs continuously > in > a separate batch queue: > PGM > DCL VAR(&MSGID) TYPE(*CHAR) LEN(7) > DCL VAR(&CHECK) TYPE(*CHAR) LEN(7) > DCL VAR(&RTNTYPE) TYPE(*CHAR) LEN(2) > DCL VAR(&KEYVAR) TYPE(*CHAR) LEN(4) > DCL VAR(&MSGIN) TYPE(*CHAR) LEN(132) > BEGIN: CHGMSGQ MSGQ(QSYSOPR) RESET(*YES) > MONMSG MSGID(CPF2451) EXEC(GOTO CMDLBL(M2451)) > MSG: RCVMSG MSGQ(QSYS/QSYSOPR) MSGTYPE(*INQ) RMV(*NO) + > KEYVAR(&KEYVAR) MSG(&MSGIN) MSGID(&MSGID) + > RTNTYPE(&RTNTYPE) > MONMSG MSGID(CPF2451) EXEC(GOTO CMDLBL(M2451)) > IF COND(&MSGIN = ' ') THEN(GOTO + > CMDLBL(DONE)) > RCVMSG MSGQ(QSYSOPR) MSGTYPE(*RPY) MSGKEY(&KEYVAR) + > RMV(*NO) MSG(&MSGIN) MSGID(&CHECK) > /* IF COND(&MSGIN = ' ') THEN(GOTO CMDLBL(MSG)) */ > IF COND(&RTNTYPE = '05') THEN(DO) > SNDDST TYPE(*LMSG) + > TOINTNET(('whoever@whatever.COM') + > ('whoever@whatever')) DSTD('!Message + > Queue QSYSOPR!') LONGMSG('Message Queue + > QSYSOPR has a message requiring a reply!') > RUNRMTCMD CMD('C:\APPS\PAGER\MSGW.CMD') + > RMTLOCNAME(CTCAPP02 *IP) + > RMTUSER(hooha) RMTPWD('hahoo') > ENDDO > GOTO CMDLBL(MSG) > M2451: SNDDST TYPE(*LMSG) + > TOINTNET(('whoever@whatever.COM') + > ('whoever@whatever.com')) + > DSTD('!Allocated Message Queue QSYSOPR!') + > LONGMSG('Message Queue QSYSOPR cannot be + > monitored - allocated to another job!') > RUNRMTCMD CMD('C:\APPS\PAGER\MSGW.CMD') + > RMTLOCNAME(CTCAPP02 *IP) + > RMTUSER(hooha) RMTPWD('hahoo') > DONE: CHGMSGQ MSGQ(QSYSOPR) RESET(*YES) > DLYJOB DLY(600) > GOTO CMDLBL(BEGIN) > ENDPGM > > -----Original Message----- > From: Patrick Townsend [mailto:patownsend@patownsend.com] > Sent: Monday, November 19, 2001 10:52 PM > To: midrange-l@midrange.com > Subject: Re: monitoring for program going in message wait > > > Santosh, > > One approach would be to create a job that runs every few minutes and > retrieves the status of the job. There is a system API (QUSRJOBA?) that > can > retrieve the current status of a job. If the API returns a MSGW status for > a > job you can send a message to the console. > > Patrick > ----- Original Message ----- > From: <santoshp@lot.tatasteel.com> > To: <midrange-l@midrange.com> > Sent: Sunday, November 18, 2001 10:31 PM > Subject: monitoring for program going in message wait > > > > There are a number of batch programs being submitted in a subsystem > > MSGBATCH in our machine, > > at times , some of these jobs go to MSGW. > > This position is unchanged until someone notices it and kills it .. > Hence > > other jobs keep waiting . I cant avoid MSGW coming . > > My reqd is that whenever a program goes to MSGW in that subsystem, a > > message should be sent to sysopr on console monitor.. > > > > How can i do that.?? > > This will really help me in eliminating one problem of mine from the > root > > level. > > Thanks > > Santosh. > > > > Signature...................... > > > > e- mail at : santoshp@lot.tatasteel.com > > ITS, Tata Steel. > > Jamshedpur, India. > > Tel : 842134 (O) , 200279 (R). > > > > _______________________________________________ > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing > list > > To post a message email: MIDRANGE-L@midrange.com > > To subscribe, unsubscribe, or change list options, > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > > or email: MIDRANGE-L-request@midrange.com > > Before posting, please take a moment to review the archives > > at http://archive.midrange.com/midrange-l. > > > > > > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing > list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-L-request@midrange.com > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. > _______________________________________________ > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing > list > To post a message email: MIDRANGE-L@midrange.com > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l > or email: MIDRANGE-L-request@midrange.com > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l or email: MIDRANGE-L-request@midrange.com Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l. _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l or email: MIDRANGE-L-request@midrange.com Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l. _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@midrange.com To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l or email: MIDRANGE-L-request@midrange.com Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
