Re: AW: HPT, PJL and Kyocera FS900 Printer

Well, as the document you referenced shows your only choice for that
printer is RMTOUTQ:

http://www-912.ibm.com/s_dir/SLKBase.nsf/acf2ee1e9d64b16e8625680b00020389/ce6b3de9874b47bc862569c1007a1dc0?OpenDocument&HighlightÐ,Kyocera

I would suggest you buy another printer instead.

...Neil





"Erich W. Schasse" <Schasse@Wiedemann.de>
Sent by: midrange-l-admin@midrange.com
2001/11/09 02:03
Please respond to midrange-l


        To:     <midrange-l@midrange.com>
        cc:
        Subject:        AW: HPT, PJL and Kyocera FS900 Printer


Hi Jim,

we can't set up as RMTOUTQ. IHMO I can't restart the print job at a
spezific
page. RMTOUTQ printing is an all or nothing printing with no user control.
One print job contains up to 10.000 pages and therefore manual operating
would be neccessary. Splitting the large output in many little outputs
seems
not to be a good idea. We use an overlay and will minimize network
traffic.

OTOH all manuals and datasheets from Kyocera, which I know, states that
they
support PCL6 and PLJ.

Thanks for your answer.

Erich W. Schasse


-----Ursprüngliche Nachricht-----
Von: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]Im Auftrag von Jim Franz
Gesendet: Freitag, 9. November 2001 04:36
An: midrange-l@midrange.com
Betreff: Re: HPT, PJL and Kyocera FS900 Printer


i think the statement is true (no support for pjl). This is not ibm's
limit,
but
Kyocera not supporting pjl.
Why not set up as rmtoutq? I use afpds on rmtoutq's without a problem.
jim franz
----- Original Message -----
From: "Erich W. Schasse" <Schasse@Wiedemann.de>
To: "Midrange-L" <midrange-l@midrange.com>
Sent: Thursday, November 08, 2001 11:25 AM
Subject: HPT, PJL and Kyocera FS900 Printer


> Hi folks,
>
> has anyone any experience of using the AS/400 to print with a Kyocera
FS9000
> laser printer.
>
> The printer shall be attached to an ethernet LAN via a printserver, that
> means the DEVD contains among others the following values: DEVCLS(*LAN)
> TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) TRANSFORM(*YES)
> MFRTYPMDL(*HP6) SYSDRVPGM(*HPPJLDRV).
>
> My special question is whether the AS/400 supports with OS400 V5R1 or
lower
> HPT with a *LAN 3812 PJL Device Desricption.
> The document 21801619 in IBM KB says no. Is that statement still true? I
> have to know that before we buy the printer.
>
> We will printing invoices with a front overlay, that means AFPDS, on
this
> printer.
>
> I would appreciate any hint because this printing function is important
for
> us.
>
> TIA
>
> Kind regards,
>
> Erich W. Schasse
> WIEDEMANN
> Wiedemannstr.
>
> 31157 Sarstedt
>
> Tel.: 05066/997-190
> Fax.: 05066/997-107
> Mail Schasse@wiedemann.de <mailto:Schasse@wiedemann.de>