Re: NICs - bottleneck (was Re: Dropping the AS/400 as a Web servi ngplatform)

[rob@xxxxxxxxx]

Great point.  A 286 cost significantly more than today's PC's.  Therefore
it must have been a better quality.

Rob Berendt

==================
A smart person learns from their mistakes,
but a wise person learns from OTHER peoples mistakes.



                    "Brad Stone"
                    <brad@bvstools.com>       To:     midrange-l@midrange.com
                    Sent by:                  cc:
                    midrange-l-admin@mi       Fax to:
                    drange.com                Subject:     Re: NICs - 
bottleneck (was Re: Dropping the AS/400 as a Web
                                               servi  ng platform)

                    10/03/2001 09:03 AM
                    Please respond to
                    midrange-l






Mike, what's the difference is between a $15-$30 NIC and a
$1800 NIC?

Pick out two nics, price them, then tell me what makes one
more expensive than the other.  What makes one "bargain
basement" and the other "high quality"?  Is this mostly
perceived because of the price?  Is it
tariffs/shipping/manufacturing costs/etc?  Or is it actual
quality.

Do the terms "high quality" and "expensive" automatically go
together?  Sure, to a point (and to a certain point of
view).  But we're way past that point.  Memory is less
expensive now, by over 200% from a few months ago?  Is it
any less high quality?

Brad

On Wed, 3 Oct 2001 08:15:43 -0500
 "Wills, Mike N. (TC)" <MNWills@taylorcorp.com> wrote:
> If you were truly building a web server that needs to be
> up 24/7/356, you
> would buy the high quality expensive parts, not bargain
> bin generic parts. I
> agree that a simple server can be built cheap, but that
> isn't necessarily a
> reliable server.
>
> -----Original Message-----
> From: Brad Stone [mailto:brad@bvstools.com]
> Sent: Tuesday, October 02, 2001 9:23 PM
> To: midrange-l@midrange.com
> Subject: Re: NICs - bottleneck (was Re: Dropping the
> AS/400 as a Web
> servi ng platform)
>
>
> Chris, you're missing the point.
>
> I don't know how many nics you can put in any iSeries.
> The
> point is how much do those NICs cost.  I can get a 10/100
> for a PC for $15.  And build a PC for 300.
>
> If I could buy parts for my iseries at best buy, then it
> wouldn't be a big deal.  A server maching like an iSeries
> should be able to accept multiple (5 or more) nics.  A
> base
> 270 should be able to have at least 5.  If not, it's not
> a
> server.  It has to be able to handle the bandwidth.
>
> I'd love to hear the lowdown, if anyone knows, how many
> NICs
> you can install in most used boxes, and the price of
> each.
>
> Brad
>
> On Tue, 2 Oct 2001 11:41:35 -0700
>  Chris Bipes <chris.bipes@cross-check.com> wrote:
> > But I can put in multiple NICs into one AS400.  My 720
> > came with 2 10/100
> > and we use a Virtual IP and load balancing.  How many
> > NICs can you put in a
> > 850 24way AS400?
> >
> > Christopher K. Bipes         mailto:ChrisB@Cross-Check.com
> > Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
> > CrossCheck, Inc.                        http://www.cross-check.com
> > 6119 State Farm Drive             Phone: 707 586-0551 x 1102
> > Rohnert Park CA  94928            Fax: 707 586-1884
> >
> > -----Original Message-----
> > From: Brad Stone [mailto:brad@bvstools.com]
> > Sent: Tuesday, October 02, 2001 11:38 AM
> > To: midrange-l@midrange.com
> > Subject: Re: NICs - bottleneck (was Re: Dropping the
> > AS/400 as a Web
> > servi ng platform)
> >
> >
> > Even so, it's still only equal to 10 10/100 nics, which
> > is
> > not that much, depending on the size of the farm you're
> > comparing it too.
> >
> > Brad
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion
> > (MIDRANGE-L) mailing list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the
> > archives
> > at http://archive.midrange.com/midrange-l.
> >
>
> Bradley V. Stone
> BVS.Tools
> www.bvstools.com
> _______________________________________________
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the
> archives
> at http://archive.midrange.com/midrange-l.
> _______________________________________________
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the
> archives
> at http://archive.midrange.com/midrange-l.
>

Bradley V. Stone
BVS.Tools
www.bvstools.com
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.