RE: Really weird printer problem

[Scott Mildenberger <Smildenber@xxxxxxxxxxxx>]

Have you looked in the job log of the subsystem to see if any better clues?
Also, another thought, in sbs QCTL do you have an entry for *ALL?  If so,
does it have control job at set to *SIGNON (ours is at *ENTER)?

Just guessing,

Scott Mildenberger

> -----Original Message-----
> From: York, Albert [mailto:albert.york@nissan-usa.com]
> Sent: Thursday, September 27, 2001 1:18 PM
> To: 'midrange-l@midrange.com'
> Subject: RE: Really weird printer problem
>
>
> No, no entries in QINTER or QCTL.
>
>
>
>       -----Original Message-----
>       From:   Scott Mildenberger [SMTP:Smildenber@Washcorp.com]
>       Sent:   Thursday, September 27, 2001 11:37 AM
>       To:     'midrange-l@midrange.com'
>       Subject:        RE: Really weird printer problem
>
>       Albert,
>
>       Could there be a Work Station Name entry in the subsytem that
> matches this
>       name?  I don't know if that would bother it but it
> looks like the
> system
>       thinks is should be a display device.
>
>       Scott Mildenberger
>
>       > -----Original Message-----
>       > From: York, Albert [mailto:albert.york@nissan-usa.com]
>       > Sent: Thursday, September 27, 2001 11:44 AM
>       > To: 'MIDRANGE-L@midrange.com'
>       > Subject: Really weird printer problem
>       >
>       >
>       > I am having a problem with a printer. When I try to vary it
>       > on I get this
>       > message:
>       >
>       >  Message ID . . . . . . :   CPF1189       Severity . . . . .
>       > . . :   70
>       >
>       >  Message type . . . . . :   Information
>       >
>       >  Date sent  . . . . . . :   09/27/01      Time sent
> . . . . . . :
>       > 13:33:49
>       >
>       >
>       >  Message . . . . :   Subsystem QCTL varied off work
> station PRT01.
>       >
>       >  Cause . . . . . :   Subsystem QCTL received CPF5257
> while using
> file
>       > QDSIGNON
>       >    in library QSYS record format SIGNON.  As a result of this
>       > error, work
>       >
>       >    station PRT01 was varied off by the subsystem.
>       >
>       >  Recovery  . . . :   Correct the problem that is causing the
>       > CPF5257 error.
>       >
>       >    Display the job log of the subsystem for more information.
>       >  After the
>       >
>       >    problem has been corrected, vary the device on (VRYCFG
>       > command).  The
>       >
>       >    subsystem will then allocate the work station when it
>       > becomes available.
>       >
>       >
>       >
>       >
>       > It is definitely a printer. Here is the device description:
>       >
>       > Device description . . . . . . . . :   PRT01
>       >
>       >  Option . . . . . . . . . . . . . . :   *BASIC
>       >
>       >  Category of device . . . . . . . . :   *PRT
>       >
>       >
>       >
>       >  Device class . . . . . . . . . . . :   *LCL
>       >
>       >  Device type  . . . . . . . . . . . :   4214
>       >
>       >  Device model . . . . . . . . . . . :   2
>       >
>       >  Advanced function printing . . . . :   *NO
>       >
>       >  Port number  . . . . . . . . . . . :   2
>       >
>       >  Switch setting . . . . . . . . . . :   1
>       >
>       >  Online at IPL  . . . . . . . . . . :   *YES
>       >
>       >  Attached controller  . . . . . . . :   CTL01
>       >
>       >  Form feed  . . . . . . . . . . . . :   *CONT
>       >
>       >  Separator drawer . . . . . . . . . :   *FILE
>       >
>       >  Separator program  . . . . . . . . :   *NONE
>       >
>       >  Printer error message  . . . . . . :   *INQ
>       >
>       >
>       >
>       > Anybody got any ideas?
>       >
>       > Thanks,
>       >
>       > Albert
>       >
>       >
>       >
>       > _______________________________________________
>       > This is the Midrange Systems Technical Discussion
>       > (MIDRANGE-L) mailing list
>       > To post a message email: MIDRANGE-L@midrange.com
>       > To subscribe, unsubscribe, or change list options,
>       > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>       > or email: MIDRANGE-L-request@midrange.com
>       > Before posting, please take a moment to review the archives
>       > at http://archive.midrange.com/midrange-l.
>       >
>       _______________________________________________
>       This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing list
>       To post a message email: MIDRANGE-L@midrange.com
>       To subscribe, unsubscribe, or change list options,
>       visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>       or email: MIDRANGE-L-request@midrange.com
>       Before posting, please take a moment to review the archives
>       at http://archive.midrange.com/midrange-l.
> _______________________________________________
> This is the Midrange Systems Technical Discussion
> (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>