× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Nate:
How did you start the interface?  There should be a start option on the work
w/interface panel.  If you start it and it does not start, then the errors
should be written to the joblog of your interactive job.  Setting IP up is
pretty straight forward.  We still have a 3.7 box at the office and IP was
pretty decent as of that release.  You need to have a line description
defined on the proper resource on your box.  Be sure it is cabled correctly
to the network.  When you vary on the line, it should go to a connect
pending status.  Be sure you start tcp using the STRTCP command.  Also
before starting TCP, you must define the interface and assign an IP address
to the AS400.  From the CFGTCP menu, use option 1.  Once the interface is
started, you should be able to PING the AS400 from a PC on the same subnet.
If you have any specific questions, let me know.
cjg


Carl J. Galgano
EDI Consulting Services, Inc.
550 Kennesaw Avenue, Suite 800
Marietta, GA  30060
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation
http://www.icecreamovernight.com
Premium Ice Cream Brands shipped Overnight
FREE AS/400 Timesharing Service -
http://www.ediconsulting.com/timeshare.html
"You ain't gonna learn what you don't want to know" - rw

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of Nate Gelbard
Sent: Sunday, September 23, 2001 6:23 PM
To: midrange-l@midrange.com
Subject: where do errors go?


Tooling around in my V3R7M0 system trying to configure
TCP/IP on either ethernet or token-ring interfaces.

The hardware seems to be configured correctly, but
in CFGTCP, Work with TCP/IP interfaces, I get
"Error occurred processing file."

Is there any more error detail to tell me what is wrong?

thanx
nate


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.