× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Chris,

Our CPU% rarely ever gets above 25%. It was sized for a WAS workload, which
we haven't implemented, so it sits practically idle much of the time.


John Taylor


----- Original Message -----
From: "Chris Bipes" <chris.bipes@cross-check.com>
To: <midrange-l@midrange.com>
Sent: Friday, September 07, 2001 15:57
Subject: RE: Client Access Session Drops


> How is your AS400 performing?  Are you maxing out the CPU?  This can cause
> the NIC to overrun the buffer if the CPU cannot pull the data off due to
an
> over worked system.  We started having these problems on our 510/2143.  We
> were running at ++++ for several hours during the day.  After we upgraded
to
> a 720 all our problems went away.
>
> Christopher K. Bipes   mailto:ChrisB@Cross-Check.com
> Operations & Network Mgr  mailto:Chris_Bipes@Yahoo.com
> CrossCheck, Inc.   http://www.cross-check.com
> 6119 State Farm Drive   Phone: 707 586-0551 x 1102
> Rohnert Park CA  94928   Fax: 707 586-1884




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.