Re: Antwort: Servers starting with TCP - Anyone know the command? (I can't use Ops Nav)

Thanks Philipp. Do you know if netserver is started with STRHOSTSVR?


Thanks

Adam Driver
Technical Consultant
Kaz Computer Services
Level 5, 66 Wentworth Ave
Surry Hills, Sydney    NSW   2010
Phone : + 61 2 9844 0386
www.kaz.com.au



                    Philipp Rusch
                    <Philipp.Rusch@rusc       To:     midrange-l@midrange.com
                    h-edv.de>                 cc:
                    Sent by:                  Subject:     Re: Antwort: Servers 
starting with TCP - Anyone
                    midrange-l-admin@mi        know the command? (I can't use 
Ops Nav)
                    drange.com


                    04/09/01 05:15 PM
                    Please respond to
                    midrange-l






Hi Adam,

goto cfgtcp then select 20 "Applications ..." and as you already
guessed, you have to configure each of the services seperately
whether to start with the strtcp command or not.
strhostsvr is for starting the client access server side counterparts
of the several client access functions. (signon server, database server
and so on , I always start all of them (strhostsvr *ALL).

HTH, Philipp Rusch


Adam_Driver@kaz.com.au schrieb:

> Thanks Antje,
>
> I wasn't actually after the command to start or stop the servers, but
> rather to specify which ones are started when the STRTCP command is
issued.
> I've just discovered, however, that the CHGFTPA, CHGHTTPA commmands (etc)
> have an AUTOSTART (*YES or *NO) parameter. I guess you have to configure
> each server separately to autostart or not if done from a command.
>
> Thanks for your help
>
> Adam Driver
> Technical Consultant
> Kaz Computer Services
> Level 5, 66 Wentworth Ave
> Surry Hills, Sydney    NSW   2010
> Phone : + 61 2 9844 0386
> www.kaz.com.au
>
>                     antje.waelde@duravi
>                     t.de                      To:
midrange-l@midrange.com
>                     Sent by:                  cc:
>                     midrange-l-admin@mi       Subject:     Antwort:
Servers starting with TCP - Anyone know
>                     drange.com                 the command? (I can't use
Ops Nav)
>
>                     04/09/01 04:09 PM
>                     Please respond to
>                     midrange-l
>
> Hallo Adam,
>
> for starting TCP-Servers you can go to menu tcpadm and then point 5 to
> start or 6 to end. Also you can use the command  STRHOSTSVR.
>
> Antje Wälde