Re: Negative response code is 1005012D

["Peter Dow" <pcdow@xxxxxxxxx>]

Hi Dean,

Have you looked at the data with DBU or DSPPFM in hex mode? Any character
less than x'40' in a display field will cause the problem.

Peter Dow
Dow Software Services, Inc.
909 425-0194 voice
909 425-0196 fax

----- Original Message -----
From: <DWard@burswood.com.au>
To: <midrange-l@midrange.com>
Sent: Wednesday, August 22, 2001 9:47 PM
Subject: Negative response code is 1005012D


>
> This is a multi-part message in MIME format.
> --
>
> Hi all,
>
>
> I am experiencing a problem with a subfile.  I can see the subfile load,
> than display briefly - then a message breaks saying "Permanent I/O error
> occurred in file PR544D"  (PR544D being my display file) - when I look at
> the message in says (Data sent to device ITSI4591 not valid.  "Negative
> response code is 1005012D.")  I have been able to determine that the
> problem only occurs for a certain set of data - being one account - I can
> access any other account using the same display and program and the
subfile
> is fine.  So I am assuming that there is something wrong with the data.  I
> have accessed the offending records using DFU and rekeyed over them to see
> if there was some kind of character in them that was not acceptable but
> still have had no luck.
>
> Upon reading through the midrange archives I noticed that this error had
> been reported on the 24th July 2001 but there appears to be no response.
>
> Can anyone offer a solution.
>
>
> Thanks for any help.
>
>
> Dean Ward
> E-mail:  dward@burswood.com.au
> Phone: 61-08-9362-7017
>
>
> --
>
****************************************************************************
***************
>                                Privacy and Confidentiality Notice
>
> The information contained herein and any attachment is intended solely for
the named recipients.
> It may contain privileged confidential information.
> If you are not an intended recipient, please delete the message and any
attachments and notify the sender of mis-delivery:
> Any use or disclosure of the contents of either is unauthorised and may be
unlawful.
> All liability for viruses is excluded to the fullest extent permitted by
law.
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com