RE: Network printer slow..Remote outqs

Hi Ken,
It could be a memory allocation problem. When using Host Transform you
should allocate from 10 to 15 Mb memory for host transform. Of course if you
have many printers you should increase it.
There is a solution for this situation which gives you the possibility to
get rid of RMTOUTQ for your LAN printers and create your printers as Device
on your AS/400.
If you are interested, the name of the product is Print2Lan and you can find
it at:
www.twindata.com

-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of ken shields
Sent: Friday, August 17, 2001 12:02 AM
To: MIDRANGE-L
Subject: Network printer slow..Remote outqs


Hi guys
Have a small problem, which has been ongoing for months.
We have a printer on the network that's slow as molasses.
Here's the scoop.
Print server is Intel NetPortExpress 10/100 with 3 ports (2 parallel and
1 serial)
two printers are connected on the parallel ports of the print server.
The print server has a static ip 10.0.0.20.This address is part of the
reserved address scope.
Configuration on the primary domain controller NT4 server using Intel
Netport Manager.
The ethernet RJ-45 cable is connected directly into a 3Comm 3300 Switch.
The PDC NT server and 4 other pc W95 stations are also connected to the
3Comm 3300 switch.
One printer downstairs functions ok...Genicom 3810s
Another printer downstairs is so slow, it takes hours sometimes before
any printing is done..................Okidata ML395 24 pin.
This last printer of course, is the problemmatic one.
Any suggestions will be gratly appreciated.
Thanks

--
Best Regards
Ken Shields
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com