Re: DON'T TRY THIS AT HOME!

You have to be in manual mode, then push the button, then wait for a response 
and push it again. 



>>> MacWheel99@aol.com 07/06/01 12:30PM >>>
> > "Powered down" the 400 by pushing the white square
>  > button on the panel, unplugged the expansion box & plugged it into the
>  > UPS, went back to power up the 400, but WAIT!, there's a signon screen
>  > at the system console!  The office manager signed on, and everything
>  > worked fine, save for a few workstation jobs that had to be killed
>  > manually.  Apparently, just pushing the power button does 
>  > nothing, 

It has been a while since I did this.
My memory is that when you push the white button you get the IBM equivalent 
of a QUESTION MARK meaning ARE YOU SURE YOU WANT TO DO THIS then you have to 
push it AGAIN meaning YES.
I do not know how long it waits between pushing it the two times.
I would check to see what the IBM equivalent is of the question mark & if 
that is still sitting on the panel.

MacWheel99@aol.com (Alister Wm Macintyre) (Al Mac)

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com 
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---