|
midrange.com
Robin,
The save/restore commands were among the few that initially did not support
the /QNTC file system, but I believe this has since been added in V4R4 or
V4R5.
You just need to use the SAV command, and specify the path to the share you
want to backup. It does not recognize things like NT authorities, so if
you ever had to do a restore, it might not be what you want, depending on
your needs.
Mark
Robin Coles
<robin@ringbase.com To:
"'MIDRANGE-L@midrange.com'" <MIDRANGE-L@midrange.com>
> cc:
Sent by: Subject: RE: QNTC
owner-midrange-l@mi
drange.com
06/01/01 09:50 AM
Please respond to
MIDRANGE-L
Mark,
Many thanks - Netserver was started as we use the IFS a lot through it, but
the DOMAIN in the netserver configuration was set to the AS/400 serial
number. Once that was changed, and Netserver re-started, QNTC is now
showing all of my shares and allowing navigation.
Now to see if I can use the 400 8mm tape drive to back up the servers....
Cheers
Robin
-----Original Message-----
From: Mark Phippard [mailto:MarkP@softlanding.com]
Sent: 01 June 2001 13:22
To: MIDRANGE-L@midrange.com
Subject: RE: QNTC
Robin,
You need to configure and start NetServer. This is the feature of OS/400
that allows you to access the IFS via Network Neighborhood. Once this is
setup properly, then the /QNTC stuff will just automatically work.
Check out this link.
http://www-1.ibm.com/servers/eserver/iseries/netserver/
You configure it using OpsNav.
Hope this helps,
Mark Phippard
Robin Coles
<robin@ringbase.com To:
"'MIDRANGE-L@midrange.com'" <MIDRANGE-L@midrange.com>
> cc:
Sent by: Subject: RE: QNTC
owner-midrange-l@mi
drange.com
06/01/01 06:22 AM
Please respond to
MIDRANGE-L
Are there instructions for setting this up anywhere? I can see QNTC in
wrklnk but taking a 5 against is doesn't show anything. My AS/400 profile
is set up identically on NT with administrator privileges and there are
numerous shares I'd love to be able to access...
Cheers
Rob
-----Original Message-----
From: Urbanek, Marty [mailto:Marty_Urbanek@stercomm.com]
Sent: 31 May 2001 18:51
To: 'MIDRANGE-L@midrange.com'
Subject: Re: QNTC
I don't think current QNTC is restricted to and/or dependent on
FSIOP/IPCS/INS/IXA/IXS. Even a system without FSIOP can use QNTC to
read/write data from/to NT.
-Marty
------------------------------
Date: Thu, 31 May 2001 12:42:09 -0400
From: Pete Massiello <pmassiello@os-solutions.com>
Subject: Re: QNTC
Mark,
That is your NT FSIOP (or whatever the current name of the card is)
data
that
is associated with your *NWSD. It always goes in the IFS, although some
piece
will also go in QUSRSYS as *SVRSTG.
Pete
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
