Re: PASTHR Question

["Dennis Lovelady" <dennis@xxxxxxxxxxxx>]

Slip of the wrist.

I meant to say, DEVD0600 instead of DEVD0700.
--
Dennis Lovelady             Fayetteville, GA
mail: dennis@lovelady.com
URL:  http://www.lovelady.com
ICQ:  5734860
--
"Most people have some sort of religion, at least they know which church
they're staying away from."
        - John Erskine


From: "Dennis Lovelady" <dennis@lovelady.com>
Sent: Tuesday, March 27, 2001 9:29 AM

> Hello, Mark and Jim:
>
> > From: "Mark Garton" <mgarton@OREILLYAUTO.COM>
> > Sent: Monday, March 26, 2001 10:39 AM
> > >
> > > If I pasthr to SYSTEM A, is there a way to get the name of the
> > > system that I passed thru from in a job that is running on SYSTEM
> > > A?  Thanks.
>
> From: "Jim Franz" <franz400@triad.rr.com>
> To: <MIDRANGE-L@midrange.com>
> Sent: Monday, March 26, 2001 5:46 PM
> Subject: Re: PASTHR Question
>
>
> > not that i'm aware of. tried to do this years ago, looking at
> > the controller's active, but was not foolproof.
>
> Well, it's been ages, but I believe that information is shown in the
DSPDEVD
> output for the passthru device.  In other words, DSPDEVD JOBNAME should
show
> that to you.  It's in the retrieve cfg descrption API QDCRDEVD format
> DEVI0700 (last two fields) also, if you'd like to go that route.  I
believe,
> in fact, that under the covers, OS/400 uses this information to support
> passthru printing.  It gets nuts, as I recall, if you do passthru from a
> passed-through job.  I have only one AS/400 at this time to work with,
> though, so cannot verify it.
> --
> Dennis Lovelady             Fayetteville, GA
> mail: dennis@lovelady.com
> URL:  http://www.lovelady.com
> ICQ:  5734860
> --
> "Some people can stay longer in an hour than others can in a week."
>         - William Dean Howells
>
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---