RE: Grumble...

["Joe Pluta" <joepluta@xxxxxxxxxxxxxxxxx>]

Chris, when I have a chance this weekend I'm going to switch my Ethernet
line standard.  My only options, though, are *ETHV2 (Ethernet Version II)
and *IEEE8023 (802.3).  Is *ETHV2 equivalent to 802.2?  Anyway, I'm going to
try those options when I get a free minute.

Thanks to you (and everyone!) for the encouragement.

Joe


> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Chris Bipes
> Sent: Friday, March 02, 2001 3:21 PM
> To: 'MIDRANGE-L@midrange.com'
> Subject: RE: Grumble...
>
>
> Have been reading your problems, even gave a couple of suggestions.  I do
> not know why you are having so much trouble.  I have 3 AS400 with 10.
> addressing and I can ping outside with the simple addition of the default
> route to our internet router.  I can even ping thru our WAN to
> 172. and 198.
>
>
> My only guess is that your AS400 is doing 802.3 only and your
> router/switches/hubs some where in the network does not.  My guess is your
> router is doing only 802.2  But these are only guesses.  I cannot remember
> if you responded to my suggestions or already check on this.
>
> Good Luck and have a relaxing weekend.

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---