RE: Grumble...

[Chris Bipes <chris.bipes@xxxxxxxxxxxxxxx>]

Have been reading your problems, even gave a couple of suggestions.  I do
not know why you are having so much trouble.  I have 3 AS400 with 10.
addressing and I can ping outside with the simple addition of the default
route to our internet router.  I can even ping thru our WAN to 172. and 198.


My only guess is that your AS400 is doing 802.3 only and your
router/switches/hubs some where in the network does not.  My guess is your
router is doing only 802.2  But these are only guesses.  I cannot remember
if you responded to my suggestions or already check on this.

Good Luck and have a relaxing weekend.


Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.        http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park CA  94928  Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000

-----Original Message-----
From: Joe Pluta [mailto:joepluta@plutabrothers.com]
Sent: Friday, March 02, 2001 12:48 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Grumble...


Hmmm... have you been reading my posts about including the AS/400 on a 10.
network?  If so, perhaps you may be able to understand my reticence to tag
the AS/400 with the rating of "excellent" as a web server.  Every other
machine on my network is perfectly happy as a 10. address, but my AS/400
refuses to speak to the outside world.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---