× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: System Terminal
  • From: "Al Barsa, Jr." <barsa2@xxxxxxxxxxxxx>
  • Date: Tue, 27 Feb 2001 21:07:17 -0500

At 08:00 PM 2/27/01 -0500, you wrote:

Assuming the workstation connects to a 6050 work station controller, you 
need wha'ts known in Rochester as a 'loon box'.

Al
>Hello,
>         I was trying to access a 9406 model 500 but do not have the orginal
>terminal that was connected to it (which is a long story about companies
>being brought-out and sold). There was an adapter that came out of card slot
>#7 that had a ethernet cable that went to a port connector and then the
>terminal was plugged into the port connector.  I took another terminal off a
>model 170 but there is nowhere to plug it in the back of the model 500, and
>the port connector for the model 170 does not have an ethernet connection.
>So I then took a PC and a hub and connected it to the ethenet connector on
>the back of the model 500 (create a little network) but the PC does see the
>AS400. Ping does not find the machine and it does not show up on the network
>neighbor.
>         Any idea's on how to access this model 500 that has an ethernet
>adapter on the back? Is there a way to directly connect a dum terminal to
>this machine?
>Thanks,
>Art
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---



+--------------------------------------------------+
| Please do not send private mail to this address. |
| Private mail should go to barsa@ibm.net.         |
+--------------------------------------------------+

Al Barsa, Jr. - Account for Midrange-L
Barsa Consulting, LLC.  
400 > 390

Phone:          914-251-1234
Fax:            914-251-9406
http://www.barsaconsulting.com
http://www.taatool.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.