× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: tape volume ID
  • From: "Neil Palmer" <neilp@xxxxxxxxxxx>
  • Date: Tue, 13 Feb 2001 10:51:53 -0500

Using the SAV, SAVOBJ or SAVLIB commands.

...Neil





D.BALE@handleman.com
Sent by: owner-midrange-l@midrange.com
2001/02/13 09:31
Please respond to MIDRANGE-L

 
        To:     MIDRANGE-L@midrange.com
        cc: 
        Subject:        Re: tape volume ID


Using what command?  If INZTAP, don't you still have to specify the NEWVOL
parameter?

Dan Bale
IT - AS/400
Handleman Company
248-362-4400  Ext. 4952

-------------------------- Original Message --------------------------
Of course, if you wanted to reuse a tape and it's expiry date hadn't been
reached, you could always specify SEQNBR(1) CLEAR(*ALL)

...Neil


Chuck Lewis <clewis@iquest.net>
Sent by: owner-midrange-l@midrange.com
2001/02/12 12:47
Please respond to MIDRANGE-L


        To:     MIDRANGE-L@midrange.com, D.BALE@handleman.com
        cc:
        Subject:        Re: tape volume ID


Dan

What I do is initialize a tape with a unique volume ONCE. Start with 
000000 (or
000001 if you aren't into IBM numbering <BG>)...

I have a file that keeps track of all of this (you can buy packages to do 
this
too). My backups save with an expiration date calculated 21 days from the 
day
they
are running (via a program) so they do not need to be reinitialized when 
they
are
due to be used again (the expiration date has passed).

You can go into System Service Tools (STRSST) and take 1. Start a service 
tool
and
then take 1. Product activity log and then take either 4. Work with 
removable
media
lifetime statistics or 5. Display or print removable media session 
statistics.
Either way you will see WHY you want to keep Volume ID's unique - this 
will
show
you the statistics of among other things, errors for each tape used.

HTH !

Chuck

D.BALE@handleman.com wrote:

> I've seen a "standard operating procedure" over the years of 
initializing
> tapes for backup using a new/different volume ID every time a tape is 
used
> (usually the current date value).  Does doing this defeat the ability of 
the
> AS/400 to detect bad tapes over a period of time?  "Problem Analysis" is 
a
> term that pops into my head for some reason.  It seems to me that the 
Volume
> ID should be set once per tape, and never used again on another tape. 
Yes?
No?
>
> As I'm just getting involved in this again for the first time in five 
years,
> my memory's still a little shaky on the subject, but I seem to remember
> thinking that if INZTAP didn't require a NEWVOL entry everytime you 
needed to
> initialize a tape, it would be easier to keep the *SAME volume ID.  Is 
there
a
> good reason why *SAME is not a valid value for the NEWVOL parameter?
>
> Dan Bale
> IT - AS/400
> Handleman Company
> 248-362-4400  Ext. 4952



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.