RE: Twinax printer IBM 6412 IPDS on V4.5

We are running both - TCP/IP and Twinax.
At first I thought that we have problems with the twinaxes only, but see that 
when try larger report on the TCP's we have similar results.
It could not be loosed connector or wire, as I put them on separate ports and 
all of them have same behavior.

-----Original Message-----
From: owner-midrange-l@midrange.com On Behalf Of Pat Barber
Sent: Wednesday, February 07, 2001 2:35 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Twinax printer IBM 6412 IPDS on V4.5


I'm confused(as usual)...are you running twinax or tcp/ip
or both ???

What you describe appears to be a physical connection problem,
like a loose cable connector or broken wire, etc,etc.

This happens a lot when you swap out entire systems and the
folks doing it, get a little rough with the connectors....


> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---