RE: Controlling ports used by DDM

Ken,

That web page is no longer active.  We are trying to decide if using 447
for these files, internal or otherwise, is a problem on the CRTDDMF
command.

Rob Berendt

==================
Remember the Cole!


                                                                                
                                    
                    "Sims, Ken"                                                 
                                    
                    <KSIMS@SOUTHER        To:     MIDRANGE-L@midrange.com       
                                    
                    NWINE.com>            cc:     rob@dekko.com                 
                                    
                                          Subject:     RE: Controlling ports 
used by DDM                            
                    01/25/01 05:20                                              
                                    
                    PM                                                          
                                    
                                                                                
                                    
                                                                                
                                    




Hi Rob -

>Do you think that 446 is the port to open up?

When I saw port 446 I did some further research.  446 is the DRDA port.  As
I already mentioned, 447 is DDM without SSL and 448 is DDM with SSL.  When
you start the DDM TCP server, it listens on all three ports.

If you look at CRTDDMF, you will see that the default for port is *DRDA.
When this is mapped to the service table, it becomes port 446.

For non-SSL connections you can use either port 446 or 447 on the CRTDDMF
command.  IBM recommends that you use 446 for clear and 447 for VPN:
http://publib.boulder.ibm.com/pubs/html/as400/v4r5/ic2924/info/db2/rbae5mst1

12.htm

I would suggest that you have port 447 opened through the firewall, and
specify PORT(447) on the CRTDDMF command for all files pointing to that
external customer.  Use CHGDDMF to change the port for any existing files
pointing to that customer.  Continue to use the default of PORT(*DRDA) for
your DDM files for internal use.

Having the firewall opened for 447 and *not* for 446 will help insure that
only the files that you specify wanting going outside your LAN will do so,
both from the programming point of view and from the firewall point of
view.

Ken
Southern Wine and Spirits of Nevada, Inc.
Opinions expressed are my own and do not necessarily represent the views of
my employer or anyone in their right mind.




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---