Re: 9404-F10 (was Re: AS/400 9404 Model E10)

[Sean Porterfield <sporter@xxxxxxxxxxxx>]

The switch was off when I got it, and it's been unplugged for a while. 
I turned the switch on before I tried to IPL.  I have it apart right
now, but forgot to bring my voltmeter back when I went home for lunch.
(That was before I saw this message.)  Thanks for the in depth
information; can't wait to try it tomorrow.

Neil Palmer wrote:
> 
> You'll kick yourself for this one, but SRC 0000 000C says "Unit emergency
> power off".  Someone hit the red switch ?  :-)
> 
> If the Emergency Switch is ON, try flipping it off/on and try the Power On
> again.
> If still no good, procedure is:
> IS there STILL a reference code 0004, 000C, 6984 or 698C ?
> YES --> Power off the system
>         Disconnect the power cord
>         Remove the control panel
>         Ensure Emergency Switch is in ON position
>         Remove cable and wires from back of Emergency switch
>         Measure resistance between pins 2 & 3 on back of Emergency Switch
> (diagram shows lower or left 2 pins as you look at back of switch)
> 
>         If resistance is more than 10 ohms:
>                 replace the Control Panel
> 
>         If resistance is NOT more than 10 ohms:
>                 reinstall control panel
>                 remove Base Power Supply
>                 Ensure Emergency Switch is ON
>                 Measure resistance between J2-14 & J2-16 on the cable
> assembly
> 
>                 If resistance is more than 10 ohns:
>                         Replace base power supply
> 
>                 If resistance is NOT more than 10 ohms:
>                         Exchange the cable assembly
> 
> ...Neil
> 
> Sean Porterfield <sporter@bestdist.com>

> > code of 11 0000 000C.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---