|
midrange.com
Patrick,
Thank you for your response. I've forwarded it on to my boss and to 'the
Cisco Kid'. I'll let you know what goes down.
Rob Berendt
==================
Remember the Cole!
"Patrick Townsend"
<patownsend@patowns To:
<MIDRANGE-L@midrange.com>
end.com> cc:
Sent by: Subject: Re: Dial up TCP/IP
owner-midrange-l@mi
drange.com
12/09/00 01:35 PM
Please respond to
MIDRANGE-L
Rob,
You might want to take a look at a dial PPP router. I think Netopia has
one.
It sits on your LAN and is connected to the AS/400 via Ethernet. When a
request is sent to an IP address routed via the router it will make the
dial
connection automatically. I believe it will also hang up the connection
when
there is no activity. This kind of connection is nice from the AS/400 side
as the remote system appears like a local LAN or Internet connection. I'm
not expert on Netopia routers, so I suggest talking to them directly if
this
is of interest.
Patrick
---
IBM AS/400 communications, FTP automation, and eCommerce
software and consulting services.
http://www.patownsend.com
----- Original Message -----
From: <rob@dekko.com>
To: <MIDRANGE-L@midrange.com>
Sent: Friday, December 08, 2000 12:32 PM
Subject: Dial up TCP/IP
>
> In the past we had one particular remote 400 in a foreign country. It
used
> dial up SNA to communicate between us and them. If we initiated the
> transaction then we would dial them. If they initiated the transaction
> then they would dial us. Dial up would occur automatically upon any
number
> of factors: STRPASTHR, opening up a DDM file, whatever. We've been kind
> of going gung ho for tcp/ip and we were wondering how to do that.
Granted,
> if this was regular internet it would not be a problem as our connection
is
> a T1. However the remote is a dialup. So we figure that we would have
to
> put a modem on both of the 400's and configure tcp/ip that way. Anyone
got
> a clue as to where to start?
> I know that we can configure a DDM file to use TCP/IP very simply, and we
> do for our LAN/WAN non dial up.
>
> Rob Berendt
>
> ==================
> Remember the Cole!
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
>
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
