RE: 9402 with a destroyed disk unit

I have a mulic 1/4 tape for an E04, would that work.  The machine is only at
v2r3 though.
cjg


Carl J. Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street, Suite C19
Marietta, GA  30064
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation
http://www.icecreamovernight.com
Premium Ice Cream Brands shipped Overnight

"You ain't gonna learn what you don't want to know" - rw

-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of Cesar leandro
Sent: Monday, November 13, 2000 9:46 AM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: 9402 with a destroyed disk unit


Andre,

Remember that those machines had a MULIC (model unic licese internal
code)you must have it no way of carrying on otherwise,any MULIC from any F04
will do.Then you need to physically remove the disk and install a "new" one,
then from D ipl the machine with the first cartridge of the O.S. or a savsys
then you'll get on the panel 11-2 A600 6001 then you choose,from the panel
option 24 after a while you'll get 11-2 A600 6002  take option 23 after
another while you'll get 11-2 A600 6052 you load the MULIC then you'll get
the DST screen.Install O.S.


Regards,

Cesar

-----Original Message-----
From: Andre Müller [mailto:andre.mueller@blancolit.com]
Sent: Sunday, November 12, 2000 10:03 PM
To: MIDRANGE-L@midrange.com
Subject: 9402 with a destroyed disk unit


Hi Folks.

I´ve got some (maybe stupid) questions and hope you can help me.
Its the following:

Usually I work with Linux (X86, PPC), BSD and NT.
I´m interested in everything and so I took the chance, when somebody offered
me a 9402 F04(V3R2M0).
Yes, I know, it´s an old machine, but for a first experience with OS/400 I
think it´s ok.
(And it was cheap ;-) )

The only problem is:
One of the two internal disk-units (Featurecode 6601) is (physically)
destroyed, so the machine boots only
up to the point, where you can start the service-tools. There is an option
to (re-)install the OS from a tape, but if I
choose it, the machine tells me that "Unit XXX is missing from the
configuration...". My questions are:

1. Is it possible to install /run OS/400 with only one internal disk ?
2. If it´s possible, how do I remove the destroyed unit from the
configuration ? (I didn´t find something possible under "work with disk
units")
3. If it´s impossible, what´s the cost for a new 6601 (if they are still
available)?
4. If a 6601 is not available anymore , which one can I use for that system
? Maybe a 6607 from a 170?

Thanks,
Andre´

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---


DISCLAIMER

Any opinions expressed in this email are those of the
individual and not necessarily the Company. This email
and any files transmitted with it, including replies and
forwarded copies (which may contain alterations)
subsequently transmitted from the Company, are
confidential and solely for the use of the intended recipient
It may contain material protected by attorney-client
privilege. If you are not the intended recipient or the
person responsible for delivering to the intended recipient,
be advised that you have received this email in error and
 that any use is strictly prohibited.

If you have received this email in error please notify the IT
manager by telephone on +44 (0)208 4762000 or via
email to Administrator@itm-group.co.uk, including a copy
of this message. Please then delete this email and
destroy any copies of it.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---