Re: 5394 and V.35 lines -- MIDRANGE-L

1) Yes it will work. The V.35 feature was an option.
2) Yes it will run at full 56Kbps
http://as400service.rochester.ibm.com/s_dir/slkbase.NSF/fd9885170ed46f758625680b00020373/5eb3438672788d86862566d50071ddd5?OpenDocument&Highlight=2,5394,V.35

3) Go to http://www.redbooks.ibm.com/ (free reg required)
Search at top left of home page on "5394" and you will see:

AS/400 in Multiprotocol Networks , SG24-4522-01
1999-01-19

AS/400 Communication Definition Examples III , GG24-4386-00
1994-12-19

AS/400 APPN Configuration Guide , GG24-4023-00
1994-06-03

The 2nd one (GG24-4386) is where you should look first.
Chapter 17. IBM 5494 V.35 via SNA/SDLC Leased to AS/400 4.6

5394 microcode info:
http://as400service.rochester.ibm.com/s_dir/slkbase.NSF/fd9885170ed46f758625680b00020373/dda59e4b56d5d6b9862566d500619d14?OpenDocument&Highlight=2,5394,configuration

Quick ref for 5394 config (fixed font required to read properly)

Item RTA000066672

Source..........: ITSO ROCH1
Last updated....: 10/29/1994
Abstract........: 5394 CONFIGURATION QUICK REFERENCE
A: * 5394 CONFIGURATION QUICK-REFERENCE *

SDLC USES FIELDS AA,BB,1,2,3, AND FOR RELEASE 2 FIELDS 8 AND P
X.21 USES FIELDS AA,BB,1,2,(3*),A,B,C, AND FOR RELEASE 2 FIELD P
X.25 USES FIELDS AA,BB,1,2,4,5,6,7, AND FOR RELEASE 2 FIELD P
(3* NOT all fields are applicable)
____________________________________________________________________
FIELD | FORMAT | FUNCTION | OPTIONS
---------|-----------|------------|---------------------------------
AA | 1 DIGIT | COMMUNICA- | 0= SDLC, 1= X.25, 2= X.21
| | TIOM MODE |
---------|-----------|------------|---------------------------------
BB | 1 DIGIT | OPERATING | 0= IBM 5394 MODE (FOR AS400)
| | MODE | 1= IBM 5294 EMULATION MODE
| | | (FOR S/36, S/38)
---------|-----------|------------|---------------------------------
1 | 4 DIGITS | KEYBOARD | 1&2 D: KEYBOARD CODE
| | CODE | 3 D: DISPLAY STATION PORT
| | | 4 D: DISPLAY STATION ADDRESS
---------|-----------|------------|---------------------------------
2 | 2 DIGITS | CONTROLUNIT| STATION ADDRESS OF IBM 5394
| | ADDRESS | HEX NUMBER
---------|-----------|------------|----------------------------------
3 | 7 DIGITS | MODEM | 1 D: 0= NONSWITCHED, 1= SWITCHED
| | CONFIG. | 2= V.25 AUTO DIAL SWITCHED
(SDLC) | | DATA | 2 D: 0= HALFDUPLEX , 1= DUPLEX
| | | 3 D: 0= MULTIPOINT , 1= PT-PT
| | | 4 D: 0= NRZI , 1= NRZ
| | | 5 D: 0= DTR , 1= CDSTL
| | | 6 D: 0= LEADING PAD NOT REQ.
| | | 1= LEADING PAD
| | | 7 D: 0= NO LOCAL LOOPBACK
| | | 1= LOCAL LOOPBACK
----------|-----------|------------|----------------------------------
8 | 3 DIGITS | V.25 BIS | 1&2 D: V.25 BIS TIMEOUT
| | AUTO-DIAL | (IN SECONDS) 01 TO FF
| | OPTION | 3 D: V.25 BIS CALL INFO SAVED TO
| | INFO. | DISKETTE
| | | (0:NOT SAVED, 1:SAVED)
----------|-----------|------------|---------------------------------
P | 2 DIGITS | PRINTER | 1 D: PORT ADDRESS (0,1,OR 2)
| | ADDRESS | 2 D: STATION ADDRESS (0 - 6)
| | |
----------|-----------|------------|--------------------------------
4 | 3 DIGITS | X.25 | 1 D: PACKET LEVEL SEQUENCE NUM
(X.25) | |SUBSCRIPTION| 0= MODULO 8, 1= MODULO 128
| | DATA | 2 D: PACKET WINDOW SIZE
| | | 2 TO 7 = MODULO 8
| | | 2 TO F = MODULO 128
| | | 3 D: LINK WINDOW SIZE (1 TO 7)
----------|-----------|------------|---------------------------------
5 | 5 DIGITS | X.25 | 1 D: PACKET SIZE (BYTES)
(X.25) | | CONFIG. | 0= 64, 1= 128, 2= 256
| | DATA | (3= 512 RELEASE 2 ONLY)
| | | 2 D: CIRCUIT TYPE
| | | 0= MULTIPLE PVCS, MULTIPLE
| | | SVCS, OR SVC CALL
| | | 1= SINGLE PVC
| | | 2= SINGLE SVC ANSWER ONLY
| | | WITH RELEASE 2
| | | 3 D: FLOW CONTROL NEGO. ALLOW
| | | 0= YES, 1= NO
| | | 4 D: ALL MANUAL OPTIONS ALLOWED
| | | 0= YES, 1= NO
| | | 5 D: LOCAL LOOP BACK SUPPORTED
| | | 1= YES, 0= NO
----------|-----------|------------|---------------------------------
6 | 7 DIGITS | X.25 | 1 D: REVERSE CHARGING ACCEPTED
(X.25) | | SOFTWARE | 1= YES, 0= NO
| | DATA | 2&3 D: LOGICAL LINK CONTROL
| | | 00= PSH, 01= QLLC, 10= ELLC
| | | 4 D: SPECIAL NETWORK ATTACHMENT
| | | 0= YES, 1= NO
| | | 5 D: LINK INITIALIZATION CONTROL
| | | 0= NETWORK OR IBM 5394
| | | 1= NETWORK ONLY
| | | 6 D: NETWORK SUBSCRIPTION
| | | 0= CCITT X.25 1980
| | | 1= CCITT X.25 1984
| | | 7 D: DIAGNOSTICS CODE
| | | 0= SNA 1984
| | | 1= ISO 1984
| | | 2= SNA 1980
---------|-----------|------------|----------------------------------
7 | 4 DIGITS | RETRY | 1&2 D: NUMBER OF RETRIES
(X.25) | HEXADECI. | PARAMETERS | HEX. 00 TO FF
| | | 3&4 D: SECOND BETWEEN RETRIES
| | | HEX. 01 TO 3C
---------|-----------|------------|----------------------------------
A | 1 TO 15 | NETWORK | IBM 5394 TELEPHONE NUMBER
(X.21) | DECIMAL | ID # | (1 - 15 DECIMALS)
| DIGITS | |
---------|-----------|------------|----------------------------------
B | 4 DIGITS | X.21 SHM | 1&2 D: NUMBER OF RETRIES
(X.21) | HEXADECI. | RETRY- | HEX. 00 TO FF
| | PARAMETER | 3 D: DELAY BETWEEN RETRIES
| | | HEX. 1 TO F
| | | 4 D: DIRECT CALL SUPPORT IN SHM
| | | 1= YES, 0= NO
----------|-----------|------------|---------------------------------
C | 2 DIGITS | OPTIONAL | DURING SHM REESTABLISHMENT,
(X.21) | HEXADECI. | CALL PROG- | UP TO 8 OPTIONAL CO-PROGRESS
| | RESS SIGNAL| CAN BE CHOSEN TO CAUSE 5394
| | | REENTRY OPERATION.
--------------------------------------------------------------------

Neil Palmer DPS Data Processing Services Canada Ltd.
50 Acadia Avenue, Ste.102 AS/400~~~~~
Markham, Ontario, Canada. ____________ ___ ~
Phone:(905) 474-4890 x303 |OOOOOOOOOO| ________ o|__||=
Cell.:(416) 565-1682 x303 |__________|_|______|_|______)
Fax: (905) 474-4898 oo oo oo oo OOOo=o\
mailto:NeilP@DPSlink.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.DPSlink.com iSeries 400 The Ultimate Business Server

"Lou Schmaus" <lschmaus@home.com>
Sent by: owner-midrange-l@midrange.com

2000/11/01 18:40
Please respond to MIDRANGE-L

To: <midrange-l@midrange.com>
cc:
Subject: 5394 and V.35 lines

I have a client that is trying to connect an IBM 5394 controller to a V.35 line at a remote location. I was under the impression that the 5394 was limited to v.25bis dialup and 9600 analog leased line. But they insist that 'it used to work at another location'. I found some references to 5494's and V.35 in the midrange archives, but no mention of 5394's. The AS/400 is a 510 at V3R7. They have a 56K line with CSU/DSU's attached, which until recently had an SNA Server attached to the AS/400, so I know the line is working. I am not sure of the model of the 5394. Of course, they do not have the manuals for the controller. 1. Can this work? They have a V.35 pigtail attached to the end of the cable on the 5394, so I assume they really did have it hooked up this way once. 2. If it will work, will a 5394 support the entire 56K, or is the max speed on these 9.6 or 19.2? Can I set the DTE speed on the CSU/DSU to 19.2, and let the line itself run at 56K? Or do I need a mutiplexor to cut the line speed down to 19.2 or 9.6 from the CSU/DSU? 3. If anyone has one of these working this way, can you private email me some line/controller configs(of maybe fax the relevant ages from the manual)? At this point they want to use the 5394, because this is only a stopgap measure until they have their new network installed sometime around the first of the year, at which time everything will be ethernet. Thanks in advance, Lou Schmaus CCA, Inc. Jackson, NJ 08527 lschmaus@link400.com