Re: Printing Problem via Perle 594e

John,
I have not had much experience with the 4230, but I believe there is a
option in the setup of the 4230 that needs to be changed to support 12 CPI.
I had to do this once a long time ago, and if I remember right the setup
option needs changed. Check the manuals with the 4230 to find out how to
change the option.
Hope this helps at least a little.
Scotty

Scotty Muir
Sr. Systems Programmer
Triangle Auto Spring Co.
DuBois, PA.
----- Original Message -----
From: <jwilki23@csc.com>
To: <MIDRANGE-L@midrange.com>
Sent: Friday, July 21, 2000 11:03 AM
Subject: Printing Problem via Perle 594e


>
>
> All
>
> Could anybody help with the following printing problem.
>
> We have been running workstations and printers remotely from an AS400
using a
> Perle 594e quite happily. A new printer (4230) has now been attached but
will
> not accept spoolfile output of 12cpi. A message is issued stating that the
> device does not support it.
> When the device description auto created it came up as a 5256. We have
changed
> the description to others printer types but nothing yet seems to work.
> Can anybody suggest a configuration that would work ?
>
> Regards
> John Wilkinson
>
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---