RE: QUSRWRK Question -- MIDRANGE-L

I would turn on User Auditing  for that particular user profile. See the
CHGUSRAUD cmd. This should give you more info on the failure. If you are
currently running the Security auditing (System Values QAUDCTL, QAUDLVL)
there may be info in there now for these failures.
Jim Franz
----- Original Message -----
From: "Mart, Nick" <Nick.Mart@kingland.com>
To: <MIDRANGE-L@midrange.com>
Sent: Friday, June 16, 2000 4:57 PM
Subject: RE: RE: QUSRWRK Question


> Al,
>
> That is the "phantom" part of the equation. This particular user sits next
> to me. He had not even arrived at the office and turned on his PC when the
> first occurance of the message happened nor was his PC even powered on.
>
> Nick
>
> -----Original Message-----
> From: Al Barsa, Jr. [mailto:barsa2@ibm.net]
> Sent: Friday, June 16, 2000 3:02 PM
> To: midrange-L@midrange.com
> Subject: Fwd: RE: QUSRWRK Question
>
>
> Nick,
>
> The second level text is the give away.  This user has entered an invalid
> password a number of times that he/she has exceeded the system value
> QMAXSIGN.  This implies that you have the system value QMAXSGNACN set to
> either 2 or 3.
>
> This is covered in the work management guide.  I do a presentation at
> COMMON called Everything You Always Wanted to Know about System Values
(but
> were afraid to ask), and I'll be happy to forward a .PDF to anyone who is
> interested.  Please send me private mail at my private e-mail address as
> listed in the signature.
>
> Al
>
>
>
>
> >From: "Mart, Nick" <Nick.Mart@kingland.com>
> >To: "'barsa2@ibm.net'" <barsa2@ibm.net>
> >Subject: RE: QUSRWRK Question
> >Date: Fri, 16 Jun 2000 13:17:09 -0500
> >X-Mailer: Internet Mail Service (5.5.2232.9)
> >
> >Al,
> >
> >Here's an example of the message detail.
> >
> >Message ID . . . . . . :   CPF1393       Severity . . . . . . . :   70
> >
> >Message type . . . . . :   Information
> >
> >Date sent  . . . . . . :   06/16/00      Time sent  . . . . . . :
> 09:54:22
> >
> >
> >
> >Message . . . . :   Subsystem QUSRWRK disabled user profile JKING on
device
> >
> >   *N.
> >
> >Cause . . . . . :   User profile JKING has been disabled because the
> maximum
> >
> >   number of sign-on attempts specified for the QMAXSIGN system value has
> >been
> >   reached.
> >
> >Recovery  . . . :   To enable the user profile, have the security officer
> >
> >   change the STATUS parameter to *ENABLED on the Change User Profile
> >
> >   (CHGUSRPRF) command.
> >
> >
> >
> >Thanks,
> >
> >Nick
> >
> >Al Barsa, Jr. [barsa2@ibm.net]
> >
> >-----Original Message-----
> >From: Al Barsa, Jr. [mailto:barsa2@ibm.net]
> >Sent: Friday, June 16, 2000 11:38 AM
> >To: MIDRANGE-L@midrange.com
> >Subject: Re: QUSRWRK Question
> >
> >
> >At 10:46 AM 06/16/2000 -0500, you wrote:
> >
> >Please provide the message ID.
> >
> >Al
> >
> >
> > >We are experiencing a "phantom" problem. We are getting a CPF1393
message
> >on
> > >QSYSMSG stating, "Subsystem QUSRWRK disabled user profile XYZ on device
> >*N."
> > >
> > >
> > >It does not appear that this user is trying to access the machine. We
> have
> > >tried the FTP process. The disabling in the FTP process comes through
the
> > >QSYSWRK subsystem. Our operations staff is getting swamped with these
> > >messages.
> > >
> > >If anyone on the list has suggestions on what to do to track this down,
> it
> > >would be greatly appreciated.
> > >
> > >Thanks in advance!
> > >
> > >Nick Mart
> > >Kingland Systems
> > >nick.mart@kingland.com
> > >+---
> > >| This is the Midrange System Mailing List!
> > >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > >| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > >| To unsubscribe from this list send email to
> >MIDRANGE-L-UNSUB@midrange.com.
> > >| Questions should be directed to the list owner/operator:
> >david@midrange.com
> > >+---
> >
> >
> >
> >+--------------------------------------------------+
> >| Please do not send private mail to this address. |
> >| Private mail should go to barsa@ibm.net.         |
> >+--------------------------------------------------+
> >
> >Al Barsa, Jr. - Account for Midrange-L
> >Barsa Consulting, LLC.
> >400 > 390
> >
> >Phone:          914-251-1234
> >Fax:            914-251-9406
> >http://www.barsaconsulting.com
> >http://www.taatool.com
> >
> >+---
> >| This is the Midrange System Mailing List!
> >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> >| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> >david@midrange.com
> >+---
>
>
>
> +--------------------------------------------------+
> | Please do not send private mail to this address. |
> | Private mail should go to barsa@ibm.net.         |
> +--------------------------------------------------+
>
> Al Barsa, Jr. - Account for Midrange-L
> Barsa Consulting, LLC.
> 400 > 390
>
> Phone: 914-251-1234
> Fax: 914-251-9406
> http://www.barsaconsulting.com
> http://www.taatool.com
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---