RE: Winsock Error

Upgrade of 95 to 98 does not always update everything.  Reformat and install
new 98 seems to work better.  IE 4.0 / 5.0 updates the TCP/IP stack and can
be the piece of the puzzle that causes the problem.  Try updating on of the
failing 95 PCs to IE 5.0 and see if that fixes the problem.  I bet it does.

Good Luck,

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000


-----Original Message-----
From: Draper, Dale [mailto:dale.draper@seu.sega.com]
Sent: Friday, May 26, 2000 1:14 PM
To: 'MIDRANGE-L@Midrange.com'
Subject: Winsock Error




Have opened a call with IBM with no resolution. Verified no port problems,
connection is via dial up through a RAS into the domain. Client PC is able
to Ping the AS400, but unable to telnet either.

Question:       What in the standard PC software could be causing the
winsock error and only on certain machines?
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---