RE: Telnet thru a firewall to DMZ

[Chris Bipes <rpg@xxxxxxxxxxxxxxx>]

Also check your firewall for a timeout value.

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000


-----Original Message-----
From: Jerry_C._Phillips@pstechno.com
[mailto:Jerry_C._Phillips@pstechno.com]
Sent: Tuesday, May 09, 2000 11:52 AM
To: MIDRANGE-L@midrange.com
Subject: Telnet thru a firewall to DMZ


We have moved our AS/400 (running V4R4) to a DMZ for future access from the
internet.  For our internal users we then redirected from the internal side
of
our firewall to DMZ allowing telnet, ftp, etc.  This all seems to work fine
except that the telnet sessions (and it doesn't seem to matter which
emulator
the client is using) after a period of inactivity (usually within the hour)
get
disconnected.  The system values for the inactivity and disconnect are both
set
at 2 hours and we get disconnected well before that.   I have looked at the
jobs
running named QTVDEVICE.  They show entries with message id TCP2552.  It
appears
because of our access via the firewall, we need to adjust the Session Keep
Alive
Timeout value in the CHGTELNA command.  The question is, to what value.
Since
it uses a *CALC currently I don't know what to adjust it to.

Does anyone have any experience in this area, OR I'am I looking in the wrong
place in trying to resolve this problem?

Jerry Phillips


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---