× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: RE: Client Access Async problem
  • From: Jeff Schmehl <Jeff.Schmehl@xxxxxxxx>
  • Date: Fri, 21 Apr 2000 10:02:58 -0400

You wouldn't happen to know the settings for US Robotics Sportster modems.
I think there are 28800 and 19200.  These were set up before my employment
here and there is no documentation.

Thanks


-----Original Message-----
From: jack.roughgarden@cussys.com [mailto:jack.roughgarden@cussys.com]
Sent: Thursday, April 20, 2000 3:29 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Client Access Async problem



Happened to me a long time ago. I my case I lost the settings on the
modems.
Once I re-configured them, all was fine. I am assuming that you also lost
power
to them as well.








Jeff Schmehl <Jeff.Schmehl@besi.com>@midrange.com on 04/20/2000 12:50:06 PM

Please respond to MIDRANGE-L@midrange.com

Sent by:  owner-midrange-l@midrange.com


To:   "'MIDRANGE-L@midrange.com'" <MIDRANGE-L@midrange.com>
cc:

Subject:  Client Access Async problem


We had a power outage at the site with our AS/400 last night.  Since then 2
remote users that use Client Access Async connection cannot dial in to our
system.  Everything looks fine on the AS/400.  The ASCII workstation
controller is fine.  The modems are operational.

What happens is that when the user dials in through Client Access, the
modems at the AS/400 will answer but if you listen to the modem on the PC,
it just continues to ring.  I've powered off the modems at the AS/400 and
back on again but the same result.  I do not get any messages on the
AS/400.

At this point, I am stumped.  Does anyone have any suggestions?

Thanks,

Jeff Schmehl

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---





+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.