Re: communications

[Patrick Townsend <townsend@xxxxxxxxxxxxxx>]

Dawn,

Just one thought on the modem eliminator: I used to purchase these from
Black Box and set them for 38.4 operation (dip switch settings). The
standard serial port on the AS/400 is rated to a maximum of 19.2 but the
timing signal is from the modem eliminator. So you can probably set it
for 38.4 without any problems. That gives you a boost on through-put.

Patrick

"Dawn L. Detz" wrote:
> 
> Please convince my mgmt what the problem is.
> 
> I have remote users in NY residing on an E10 V3.2 passing through (appc 64K)
> to an F50 V3.2 in PA, some using a program called ELKE on the F50.  These
> same ELKE users (off the F50 from the E10) are passing through via Modem
> Eliminator to the 620 V4.2 (which physically sits next to the f50) using
> JDE.
> 
> Problem:  The NY users say ELKE responce time is fine but JDE responce time
> stinks....  To draw it out for you:
> 
> E10(NY) -> F50(PA) -> 620(PA) then sending splf etc back
> 620 -> F50 -> E10
> 
> Why do you think?  My mgmt wants explaination.  I told them we are using an
> F50 as a server and it is NOT intended for this use.  Maybe if they hear it
> from 20 other opinions it will help my case.
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
IBM AS/400 communications, FTP automation, and network security
software and consulting services.

http://www.patownsend.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---