Re: Xerox Document Center settings

Dave,

I wish my install went as well. Perhaps you can catch something I've missed.
We setup a Xerox N4025, and it is working fine, but our DC332ST with the
same remote OutQ config prints from the networked PC's just fine, but when
we send a print screen from the AS400 there is no response. We tryed both
*XRX4220MRP and *HP4, Host Print Transform=*YES. Everything else is default.
Too bad Xerox support isn't more knowledge able on the 400. I know I am
asking alot, but if you could fax me your remote OutQ setup and DC332
Printer Configuration report I would be very greatful. I am thinking it is
something in the printer.

Thanks
rickhollosy@astecservices.com
Fax 888.248.5107

----------------------------------------------------------------------------
---------------

----- Original Message -----
From: "Shaw, David" <dshaw@spartan.com>
To: <MIDRANGE-L@midrange.com>
Sent: Thursday, March 30, 2000 4:30 PM
Subject: RE: Xerox Document Center settings


> Rick,
>
> Yeah, I got it to work.  I set the MFRMDLTYP to *HP4 and it works great,
just
> like the real HP 4 that it sits next to.  Surprisingly simple solution,
eh?  Of
> course, now they want an old HP III to print some of these things, too,
and I
> haven't found any simple answers for that.  Sigh.
>
> Dave Shaw
> Spartan International, Inc.
> Spartanburg, SC
>
> > -----Original Message-----
> > From: rick400tec@astecservices.com
> >
> > Dave,
> >
> > Have you had any luck on getting the DC332ST to print 198
> > char's? I will be
> > working on attaching DC332ST and a Xerox N4025 to an AS400
> > soon. I have
> > heard that the DC332ST only supports PCL5 and PostScript2
> > where as the N4025
> > supports PCL5 & 6 and PS 3. I doubt that your truncation
> > problem is related
> > to either. Can you change the font from the AS400, I seem to
> > recall using
> > that to get the text to fix.
> >
> > Good Luck,
> > rickhollosy@asteceservices.com
> >
> > ----- Original Message -----
> > From: "Shaw, David" <dshaw@spartan.com>
> > To: "'MIDRANGE-L'" <MIDRANGE-L@midrange.com>
> > Sent: Thursday, March 16, 2000 1:26 PM
> > Subject: Xerox Document Center settings
> >
> >
> > > On the off chance that someone has run into it before, does
> > anyone know
> > how to
> > > fix this?  We have a Xerox Document Center model DC332ST
> > which we've set
> > up on
> > > the /400 to use remote outq printing through an NT box.  The outq is
> > defined to
> > > use host print transform.  When the queue was created, the
> > MRFTYPMDL was
> > set to
> > > *XRX4220MRP - I haven't caught up to the guy to find out
> > why he picked
> > that one.
> > > The problem is that reports with a record length of 198
> > characters get
> > truncated
> > > on this printer.  Does anyone know if one of the other choices for
> > MFRTYPMDL
> > > would fix this, or do I have to make a custom *WSCST to get
> > this to work?
> > The
> > > old HP LaserJet 4 next to it prints these reports fine,
> > albeit slowly, so
> > the
> > > users already believe we're just "dragging our feet".
> > Thanks in advance!
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---