Re: Automating SNDNETF and RCVNETF

[endofthetrail@xxxxxxxxxxxxxxx]

Thank you for the lead!  I have been trying it but getting an error:
4 > SAVRSTLIB LIB(LNOTES) RMTLOCNAME(S104N5GM)                          
    ObjectConnect/400 internal error, function code 03, return code 04. 
    An error occurred during the SAVRSTLIB operation.                   
We are using OPTI-connect between the two.  I tried to lookup the erroe on the 
internet, but aint had any luck yet.

> Why not use the SAVRSTOBJ or SAVRSTLIB.  Its in OS/400, and its done for you.
> 
> Jim Oberholtzer/Computech wrote:
> 
> > <*snip>
> > The method that has been recommended  or employeed is: save to save file;
> > sndnetf; on the other box...  rcvnetf  and restore the save file.
> > <endsnip>
> >
> > The best way to get this done is with a remote command, however, if there
> > is a time lag between the sending job and the file being received by
> > distribution services, the send remote command will fail.  You really have
> > two options:
> >
> > 1)  Change to FTP.  You did not say if TCP/IP was up on your boxes however
> > if it is, you can accomplish the entire job from your host machine by using
> > FTP commands.  (my first choice, and will give better performance)
> >
> > 2)  Create a program on the target machine that waits for a message to the
> > receiving user profile and then goes and does the receive net file.  I have
> > done this before, and while it takes some effort it works well.
> >
> > Jim
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to 
MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator: 
david@midrange.com
> > +---
> 
> --
> Pete Massiello
> OS Solutions International
> Phone: (203)-744-7854  Ext 11.
> http://www.os-solutions.com
> mailto:pmassiello@os-solutions.com
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> 



1

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---