RE: ASCII question 6141 Vs f/c 2761 or <??>

Glenn:
We recently replaced a bunch of our clients model 400s to 620s and 720 and
they all had a 6141 card in it for customers to dial in.  We evaluated a few
of the protocol converters on the market and were not very impressed and
decided to use a a product from Sonic Systems called a Bandit.  It is
basically a Remote Access Server that supports PPP dial up.  It is a far
superior product to the ASCII RWC.
Carl


Carl J. Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street, Suite C19
Marietta, GA  30064
(770) 422-2995 - voice
(419) 730-8212 - fax
mailto:cgalgano@ediconsulting.com
http://www.ediconsulting.com
AS400 EDI, Networking, E-Commerce and Communications Consulting and
Implementation

> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Glenn Ericson
> Sent: Friday, March 24, 2000 8:36 PM
> To: MIDRANGE-L@midrange.com
> Subject: ASCII question 6141 Vs f/c 2761 or <??>
>
>
>
>
> We  need to  support  5  groups or 8 ASCII  lines  attached to PCI bus
> technology.
>
> A bunch of  F/c 6141 "ASCII Workstation Controllers''(SPD).  This  feature
> has been  with drawn and  the RISC  730  will need PCI  technology to
> support the  ASCII  environment.
>
> Does anyone know if   f/c 2761 "PCI  8 Port  Integrated Analog  Modem"
>  will  work as  replacement for  the old 6141 crap to support dial-in on
> the PCI  bus environment?
>
>  If  that is not the answer  what  & whose  products will  work?
>
>   Thanks
>
>
>
> ________________________
> Glenn Ericson,
> Phoenix Consulting LLC
> New York , NY USA
> Ph.(718)898 9805  Fx .(718)446 1150
> mailto:Glenn-Ericson@att.net
> __________________________
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---