Re: Help TCP - CPI7E9B.

Booth:
We have installed a few dozen Bandits and have had no response problems,
just like being there.  I'd be glad to help you.  The Bandit is a RAS server
that allows you to hook up dial up modems to, also it allow you to dial out
the the internet and bond several dial up modems together.  It also has a
built in hub.  Nice unit, however our LAN guys says they are being
discontinued, so we have bought up a few extra just to have on site for a
client who has been replacing dial up 3164 to dial up PPP.
cjg

Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Martin, Booth <BoothM@goddard.edu>
To: 'MIDRANGE-L@midrange.com' <MIDRANGE-L@midrange.com>
Date: Wednesday, February 23, 2000 12:42 PM
Subject: RE: Help TCP - CPI7E9B.


>Also, get a hub that supports a modem and then you can dial in or out from
>anywhere, and even put your AS/400 on the internet if you want to.  Carl
>suggested the Bandit RAS which I've delivered and it works nicely, but its
>slow.  I suspect the slowness is a setting I don't understand.
>
>
>-----Original Message-----
>From: Bob Crothers [mailto:bob@cstoneindy.com]
>Sent: Wednesday, February 23, 2000 10:53 AM
>To: boothm@goddard.edu
>Subject: RE: Help TCP - CPI7E9B.
>
>
>Prices on Ethernet hubs have come WAY down.  We just bought a 5 port 10mhz
>hub for only $30 at our local CompUSA.  It was a "no-name" brand, but it
>does work.
>
>-----Original Message-----
>From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On
>Behalf Of joberhol@compures.com
>Sent: Wednesday, February 23, 2000 10:02 AM
>To: MIDRANGE-L@midrange.com
>Subject: Re: Help TCP - CPI7E9B.
>
>John,
>
>You might want to invest in a HUB.  Fairly cheap ones can be found via the
>internet or your local store.  That way if more that one device or a
>printer are going to be attached via ethernet, your already set up.  I
>would guess your cable is the source of the problem.  We are assuming that
>the line is configured etc, and TCP/IP is set up.
>
>Jim
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
>david@midrange.com
>+---
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
>david@midrange.com
>+---
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---