Configure a console in Client Access Express v4r4

["Gary Kuznitz " <docfxit@xxxxxxxxxxx>]

I'm trying to configure a console in Client Access Express v4r4 with 
the latest service pack SF59557.  When I configure the AS/400 
Operations Console locally (no modem) I get a status of 
"Connecting Console" with an SRC  A9003C60 on the front panel of 
a 150 running V4r4 with the latest CUM & hypers.  The SRC is not 
in the manual.  IBM hardware says the SRC is a console timeout 
and will go away when the console is connected.  If I connect the 
cable to a different PC running CA ver. v3r2 I get a signon display 
with no problem but the SRC does not go away.  They say in order 
to get Express to connect I must disable "Auto Session 
Disconnect" and "Power Saver Mode".  IBM Hardware didn't know 
where those options are to disable them.  I have seen Power Saver 
Mode on some PC's in Control Panel but I don't know if this is what 
they are talking about.  I have never seen a feature called Auto 
Session Disconnect.  Does anyone know where these two options 
are?  Are they in CA someplace?  Are they defined in a PC 
someplace?  Are they defined in the 400 someplace?  

TIA,

Gary Kuznitz

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---