Re: Client Access Session does not start. -- MIDRANGE-L

Also note that in order for this to work the system name specified in the
HOSTS file must be identical to the name listed in the 'AS/400 Connections'
column of the AS/400 Connections panel.

----- Original Message -----
From: Ray Peterson <rpeterso@witc.tec.wi.us>
To: <MIDRANGE-L@midrange.com>
Sent: Tuesday, January 04, 2000 10:35 PM
Subject: Re: Client Access Session does not start.


> When I've encountered this, it's usually because there is not an entry in
> the PC's host file for the AS/400.  Try "ping <as400>" in a dos window
> where <as400> is the name of your /400 as used in CA.  If you normally
> use DNS to resolve this address, perhaps your DNS is unavailable?
>
> HTH...
>
> Ray
>
> Dave Mahadevan wrote:
>
> > Folks:
> >
> > I have a problem with Client Access (SF59075 applied) in Win98 with
> > TCP/IP.  This was working just fine till yesterday.  The emulator 5250
> > session hangs with that dang 657 in the status bar.  The AS/400 on V3R2
> > with latest cum ptf never gets the request because I checked Netstat
> > option 3 for telnet in my pc's remote address.  I have checked the host
> > servers, QUSER password etc.  I can get shared folders, client access
> > data transfers etc but no emulator session.  The connection is ok and
> > verify connection returns no errors or warnings.   I have tried creating
> > a new session with no name and no go.  Job QTGTELNETS has no strange
> > messages.  Netstat does show me as-cent (port 8470) and as-file (port
> > 8473).  I uninstalled SF59075 with no difference.  I ipled the AS400
> > with no  success. I ran a trace on the pc and the trace shows a socket
> > error.  Following is from trace log.
> >
> > [7] 01/04 22:14:17.61,(0055) len=79, 5250 Emulator.Communication
> > data.0001, FFC67CEB:FFC6A057
> >              Server Host Name: AS400
> >
> > [8] 01/04 22:14:21.47,(0056) len=18, 5250 Emulator.Communication
> > data.0001, FFC67CEB:FFC6A057
> >              SOCKET ERROR: sock_error()=11001
> >
> > What the heck is it? How do I fix it?   This thing does not use WSOCK32
> > .. right??  I am now very close to thinking of uninstalling the entire
> > product and reinstalling but if there is a better way to keep the little
> > hair I have left... Thanks for any ideas.
> >
> > --
> > Thank You.
> >
> > Regards
> >
> > Dave Mahadevan.. mailto:mahadevan@fuse.net
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
david@midrange.com
> > +---
>
> --
> Ray Peterson
> WITC - Shell Lake
> 505 Pine Ridge Drive
> Shell Lake  WI  54871
> www.witc.tec.wi.us
> 715 468-2815
>
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---


__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://messenger.yahoo.com

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---