Re: TCP/IP printing

["John Taylor" <john.taylor@xxxxxxxxxxxxxxx>]

Hi John,

In your OUTQ description, you need to set the RMTOUTQ parameter to "RAW1" or
"RAW2" respectively for each port on the server.


----- Original Message -----
From: John Cirocco <john_cirocco@piercestevens.com>
To: <midrange-l@midrange.com>
Sent: Wednesday, September 29, 1999 10:16
Subject: TCP/IP printing


> I am trying to do direct printing using TCP/IP to our HP printers which
> are attached via Jet Direct boxes/cards.
>
> Everything was going along just peachy when we came across a 2 port jet
> direct box.  Unfortunately you can assign a single address to it.  Now
> how would I configure the 2 AS/400 remote queues when I have only one
> address.  I gotta believe I am not the first to attempt this.
>
> Thanks in advance for the help.
>
> Regards,
> John
>
> John W. Cirocco
> Director, Information Technology
> Pierce & Stevens Corp.
> 710 Ohio Street
> Buffalo, NY 14203
> John_Cirocco@PierceStevens.com
> Phone 716-856-4910 Ext. 201
> Pager 1-800-670-7039
>    or 6707039@pagemci.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---