Re: PRINTONIX P5215 connection to AS/400. HELP!

Rommy:

You have to create a OUTQ on the Novell network.
You have to get a JET DIRECT BOX for the printer.
Remove the Ethernet card from the printer.
Connect JET DIRECT BOX to printer via parallel port.
Configure JET DIRECT BOX with an IP address.
Ping IP from AS/400 to be sure it is Activated on Novell.
On the AS/400 create an IP device for the outq, do not vary on the device.
change outq using CHGOUTQ using *intnetadr, IP and manufacturer type and
model.

Oludare


----- Original Message -----
From: Rommy Prawirasatya <ROMMY@MULTIPOLAR.CO.ID>
To: MIDRANGE-L (E-mail) <MIDRANGE-L@midrange.com>
Sent: Friday, September 10, 1999 5:16 AM
Subject: PRINTONIX P5215 connection to AS/400. HELP!


> Dear all,
>
> Our customer have PRINTONIX printer Model P5215 with ETHERNET card attach
to
> the printer.  Planning to communicate with AS/400 via LAN with TCP/IP.
> Currently they're using Client Netware or IPX as their network protocol.
>
> I've tried using CRTOUTQ with these parameters:
> OUTQ(TEST QGPL) SEQ(*FIFO) RMTSYS(*INTNETADR) RMTPRTQ(D1PRN)
> AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES)
> USRDTATFM(*NONE) MFRTYPMDL(*IBM6404) WSCST(*NONE)
> INTNETADR('10.10.10.4') CLASS(A) FCB(*NONE) DESTOPT(*NOWAIT)
> Others parameter use default value.
>
> After that, I use STRRMTWTR with these parameters:
> OUTQ(TEST QGPL) WTR(*OUTQ)
> Others parameter use default value.
>
> In WRKSPLF, we use option 2 to CHGSPLFA with these parameters:
> DEV(*OUTQ) PRTSEQ(*SAME) FORMTYPE(*STD) COPIES(1)
> RESTART(*STRPAGE) OUTQ(TEST QGPL) FILESEP(0)
> PAGERANGE(1 *END) SCHEDULE(*IMMED) SAVE(*YES)
> OUTPTY(2) USRDTA(*SAME) ALIGN(*NO) PRTQLTY(*STD)
> Others parameter use default value.
>
> It all really done well, mean this Printonix printer can print the spool
> file well, with this simple configuration (without CRTDEVPRT).
>
> BUT...when the customer might have to select pages to print out, such as
> customer want to print page 20 to 50 from 100 pages total, it didn't do
> well,...mean that it printed all the 100 pages.
> I have change the parameter at CHGSPLFA, PAGERANGE (20 50), BUT the result
> then...it still printed all the 100 pages.
>
> Do anyone in this forum have any experience with printer with ehternet
card
> attached or printer with IP address?
> Maybe anyone of you can give me better solution about this.
> Appreciate for all your suggestions.
>
> Note:
> I've tried to CRTDEVPRT with the compatible type for these PRINTONIX
printer
> as said in the Printonix Guide Book, it said that's compatible with IBM
> ProPrinter XL, but it always failed.
>
> Thanks,
> Rommy Prawirasatya
> AS/400 System Engineer
> PT Multipolar Corp.
> Telp.: +62 21 5845455, 5460011
> Fax.: +62 21 5460020
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---