Re: Host dials 5394

Pat:
Change the controller description to DIALINIT to *IMMED.  Then when the
controller is varied on, it will immediately look for an available line in
the Switched Line list and initiate the dial.  You could also write a small
program that would vary on the line, then the controller and schedule it so
the line could come up automatically at a certain time of the day and then
have another program that disconnects.  (or you could specify switched
disconnect *YES and have the line drop automatically after the last device
signs off.).  Toggling the controller On and OFF will initiate dial.
HTH,
CJG
Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Pat Barber <MBOCEANSIDE@postoffice.worldnet.att.net>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Thursday, August 19, 1999 12:02 PM
Subject: Re: Host dials 5394


>Patrick Townsend wrote:
>>
>> Pat,
>>
>> Assuming you are using an IBM modem (or other modem that supports V25bis
>> dial) you can change the controller description to *DIAL, the dial
>> command parameter to *V25BIS, and the phone number to the number of the
>> 5394. The line description may have to be changed to allow a dial
>> connection. And, of course, the 5394 will have to be changed to
>> auto-answer and accept a dial connection.
>
>Yepppp.... But HOW does the operator at the 400 make the call ??? Vary
>on the controller ?? Vary on the Line ??? We got the V25bis modems on
>both ends(7852-400) so that's not a problem...
>
>Regarding frame relay... we are lucky if we can get a decent dial line,
>frame relay has not appeared in this part of the world just yet...
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---