RE: Client Access file transfers locking - V4R4

[Chris Bipes <ChrisB@xxxxxxxxxxxxxxx>]

Is your power user transferring to a standard text file on the PC?  If so,
try using FTP from the PC, that is assuming you are connected via TCP/IP.
We actually copy spool files directly to the IFS.  Once there, it is easy to
open with a PC.  If you don't need to translate it to a PC type data base or
spread sheet this should be much simpler than client access file transfer.
Very large files have worked for me, but then I am only on V3R7.

Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park  CA  94928 Fax: 707 586-1884

 

-----Original Message-----
From: Mark A. Manske [mailto:manske@pconline.com]
Sent: Wednesday, August 18, 1999 7:40 AM
To: 'MidRange AS/400'
Subject: Client Access file transfers locking - V4R4


I was wondering if I am alone in this situation - I am on V4R4, cum C9229440
and latest patches for the PC on both CA V4R4(express - SF57098) and
V3R2(normal - SF57002).   I have a "power-user" doing file transfers of her
print-out to a text file on the PC for sending out to other government
entities.  She copies the spool file to a source physical file, this file as
7,081 lines, she then does the CA file transfer, it gets to record 3,483 and
just stops; causing a dump to qezdebug outq..

MESSAGE ID-                   MCH0601
MESSAGE FILE-                 QCPFMSG                LIBRARY-          *LIBL
SEVERITY-                     40
MSGTYPE-                      0F
SENDING-
.PROGRAM-                     QZDASQL
IBRARY-                       QIWS
.INSTRUCTION-                 1CEE
RECEIVING-
.PROGRAM-                     QZDASQL                LIBRARY-          QIWS
.INSTRUCTION-                 1CEE
MESSAGE-
 Space offset X'00000000' or teraspace offset X'0000000000000000' is outside
current limit for object DASERVER_SPACE0001

And for a real interesting tid-bite, If I have her split the member up into
three smaller ones sized as  3,400 lines,  3,600 lines and 81 lines and
do the transfer as create, then append the last two members; it works (going
over the previous 3,483 stop)

Is there a record limit; is there a "better" way to allow the users to do
this without taking too much of my time for "training"

Thank you for the suggestions and help; and hope this gives everyone another
heads up on V4R4

Mark A. Manske
Sr. Project Lead


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---