× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Vary on device Failed
  • From: "Moore, Robin M." <rmoore@xxxxxxxxxxxxxxxx>
  • Date: Wed, 04 Aug 1999 14:30:00 -0400 (EDT)


I appreciate the Help, But I have already tried to delete and recreate the 
device
The device I'm using is a 5150 device using Client Access over a 5250 
emulation
card. I have also made sure that the max. of devices on the ctr is less or 
equal
to 40.

 Thanks for the help in advance.. Robin

 ---------

I have experienced this problem with my tape drive last month and what I did
was
to re create the device description and then the vary on worked.

 ----------------


 Hi all,
I first wanted to thank you all for the information I have received from
this
Midrange System Mailing List.

We are running in S36 mode on an as400  V4r3 and from time to time I get
the following message on a device after it had ceased to comunicate(Usually
when power failers or just users closing an open session.

This is a workstation device named Z1 uses an 5250 emulation card.
I can vary the device ( it first showes failed sometimes) , but when I vary
the device on, I get the following message.

Usually atleast by the next day I can vary the device on and it will work.

I have worked with active jobs to make sure the job isnt still running.

Thanks for you help.. Robin



 Message ID . . . . . . :   CPD27CF       Severity . . . . . . . :   40

 Message type . . . . . :   Diagnostic

 Date sent  . . . . . . :   08/03/99      Time sent  . . . . . . :
  10:06:11


 Message . . . . :   Device Z1 vary on failed.

 Cause . . . . . :   Configuration error was found by the system.  The vary

   command failed. Reason code 00002006. Reason codes and their meanings

   follow:

     --00002006: The device type specified in the device description Z1 does

   not match the type associated with resource PRT048.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.