RE: Communication question

Sorry to have to disagree Jeffrey but a fair percentage of our customers
move their ASYNC comms from the PC to their AS/400 just because of the
control and reliability they can get. How much reporting do you get from
Procomm or HyperTerminal telling you when lines are down or files didn't
get sent? How do you recover the PC when the comms application locks up
- the old three finger salute's not much good in an unattended
operation. We have customers running anywhere from 1 to over 100 comms
lines without a networking staff. The only downside I see is the max
speed of the slower comm ports but those can be upgraded. 

> -----Original Message-----
> From: Jeffrey Silberberg [SMTP:jsilberberg@mindspring.com]
> Sent: Thursday, June 03, 1999 7:12 AM
> To:   MIDRANGE-L@midrange.com
> Cc:   nina jones
> Subject:      Re: Communication question
> 
> 
> Nina,
> 
>         Yes, look at the "Asynchronous Communications Programmer's
> Guide"
> SC21-9592  for some direction and help in getting the AS/400 to
> connect to
> the link.
> 
>         BUT, the reason I used the approach I have is that ASYNC over
> a data
> comm link can be a real issue with dropped or mal-formed bytes, and
> timimg
> issues to the ASYNC controller if you have an ACK/NAK protocol.  By
> puting a
> device at the interface and using a more robust protocol over the
> network/DDS connection you will have MUCH less gray hair in the long
> run.
> 
>         You do have lot's of good options from list members.
> 
>         Good Luck,
>         JMS...
> 
> -----Original Message-----
> From: nina jones <ddi@datadesigninc.com>
> To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
> Date: Wednesday, June 02, 1999 11:07 PM
> Subject: Re: Communication question
> 
> 
> >>
> >>         Nina I do this for clients day in and day out with
> something that
> is
> >> much more critical that what GM is most likely sending, we do E-911
> >> Automatic Number/Location Information interfaces.   You say the
> data is
> >> coming over a DSU/CSU connection in ASCII but not what is
> generating it,
> or
> >> what the over the wire protocol is, if any, do you know ?
> >>
> >>         Our interface is a basic PC using COM1: to interface to the
> ASCII
> >> hardware, and APPC over Ethernet or Token Ring to talk with the
> AS/400.
> All
> >> messages go in a Data Queue, as well as a Physical file.
> >>
> >>         Let me know if you think it's a fit, or if you want more
> details.
> >
> >they wanted the data to go directly to the as/400, if possible, not
> an
> >intermediate p/c.
> >
> >nj
> >+---
> >| This is the Midrange System Mailing List!
> >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> >| To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
> >| To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> >| Questions should be directed to the list owner/operator:
> david@midrange.com
> >+---
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---