RE: Telnet to an AS400 via NOKIA 9110 GSM telephone

Buon Giorno!
The ASCII Work Station Reference manual has an appendix called Keyboard
Mapping that will tell you all the commands, but here is a short sample:
F3 = Esc, 3 (two separate key presses, not both together)
F11 = Esc, -
F15 = Esc, #
Page up = Esc, d
Page down = Esc, u
Reset = Esc, r
Field + = Esc, p
Field - = Esc, m

Buck Calabro
Billing Concepts Albany, NY

> -----Original Message-----
> From: Marco Stanghellini 
> Sent: Friday, May 21, 1999 4:26 PM
> To:   MIDRANGE-L@midrange.com
> Subject:      Telnet to an AS400 via NOKIA 9110 GSM telephone
> 
> I used the telnet application to connect remotely to my WAN via our CISCO
> routers.(mainly through our CISCO 3640)
> I can manage IOS CISCo software very well, but problems begin when i try
> to connect to my AS400 because the telnet inside my NOKIA 9110 is a normal
> VT100 telent and so i can only use PF1,PF2,PF3, and PF4.
> So i can connect, but i can only give some commands but without all the
> other PF functions is very hard. (I can't give page down or up too)
> Does anyone know a secondary way to give the AS400 command like page down
> or up, PF5----PF24?????
> I know that's athe VT100 problem and so I'm asking nokia to give me a
> better telnet for emulate my AS400 but I'm a little man against a very big
> company.
> 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---