Re: Devices across the street from a remote controller

Sounds to me like you need to have 2 separate remote 5494s set up.
CJG
Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Sclind2@aol.com <Sclind2@aol.com>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Thursday, March 25, 1999 11:34 AM
Subject: Devices across the street from a remote controller


>I need to put a 5394 controller at a remote site to twinax connect some
>printers and PC's with 5250 emulation cards.  Then across the street I need
to
>have some more of the same devices.  *But* across the street is a
>superhighway, so we can't run any cable; we have to use the phone company's
>lines.
>
>Is there a piece of hardware that I can place at each remote site that will
>allow the devices 'across the street' to be connected to the 5394?
>
>Scott Lindstrom
>Zenith Electronics
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---