Fw: CA Express configurations

["Roger Pence" <rp@xxxxxxxxxxxxxx>]

>>When creating a new session with the Client Access Express the
>>configuration page comes up and wants a system name, there is no
>>way to make a new connection available.  So therefore if you want
>>to do this as a new install, the only thing you can specify for a
>>system name to get a connection is the IP address of the AS400.
>>I have not been able to find any type of connection setup in the
>> programs that come with the product.  If I manually add a host file
>>to the PC with the cross reference to the IP address and Machine
>>name the emulator configurator will find the name and associate
>>with the correct machine, without that file I must use the IP address
>>to make a connection.  In the older versions of client access the
>>connenction wizard always came up and created that host file to
>>associate the ip address and the host name.
>
Express doesn't provide the connection setup because it doesn't use a base
connection (and, no background processes!). Unlike earlier versions, Express
requires you to explicitly put the HOSTS file there yourself (put a file
named HOSTS (no extension) in the Windows folder with the line
xxx.xxx.xxx.xxx  system_name
where xxx... is your AS/400's IP address and system_name is the AS/400's
system name. This lets Express connect by system name.

There is a new 562 page Express redbook available at
http://www.redbooks.ibm.com/SG245191/sg245191.htm.

rp


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---