Re: subfile processing--readc & sflnxtchg -- MIDRANGE-L

You can achieve the same by doing a Z-ADD 1 to the RRN field for the subfile. 
Now
the READC will startwith the first record in the subfile.

HTH

Paul Tuohy

Nagendra wrote:

> Hi,
>
> Issue a WRITE on Subfile control record to position the pointer again at
> the beginning. Then you can again start READC which will now again start
> from the beginning.
>
> Bye
>
> > -----Original Message-----
> > From: email@james-w-kilgore.com [SMTP:email@james-w-kilgore.com]
> > Sent: Friday, February 12, 1999 6:37 AM
> > To:   MIDRANGE-L@midrange.com
> > Subject:      Re: subfile processing--readc & sflnxtchg
> >
> > Bob,
> >
> > Here's where we "force" SFLNXTCHG to occur:
> > We have a panel that displays a subfile and permits a user to make
> > changes.
> > When the EXFMT kicks the program back in gear, we start a
> > READC/validate/process
> > loop.
> > If any errors are detected during the validate portion, we turn on our
> > handy
> > dandy universal error indicator (along with reverse image, etc.) and
> > UPDAT the
> > subfile record with the SFLNXTCHG conditioned by the universal error
> > indicator.
> >
> > Now in your case, if I hear you right, you want to do two or more
> > READC loops,
> > maybe one to validate and another to actually process.  If that is the
> > case, you
> > would need to UPDAT each changed subfile record to get READC to work
> > on the
> > second loop.
> >
> > Maybe in you case, condition SFLNXTCHG by an "OK" indicator.
> >
> > HTH,
> >
> > James W. Kilgore
> > email@James-W-Kilgore.com
> >
> >
> > "Ladutko, Bob" wrote:
> >
> > > Maybe I'm confused on my thinking (it's happened before).  I'll have
> > to look
> > > through some programs tonight.
> > >
> > > I was thinking that when a READC is performed, and a changed record
> > is
> > > retrieved, it wouldn't be retrieved again until the next EXFMT if
> > you use
> > > SFLNXTCHG.  My question is how exactly would that same record be
> > retrieved
> > > during the same pass?  Would I have to CHAIN to a prior record 1st
> > so that
> > > the READC will work again or what?  (I'm comparing this to a READ to
> > a
> > > physical file - if I want to READ a record again, I have to
> > reposition the
> > > file.)  If this is how to do it, what if the 1st record in the
> > subfile was
> > > changed?  Since I can't do a SETLL, how can I retrieve that record
> > again
> > > with READC?
> > >
> > > Is my thinking as flawed as it seems to be?
> > >
> > > Bob L.
> > >
> > > > -----Original Message-----
> > > > From: Fisher, Don [SMTP:DRF@HeiligMeyers.com]
> > > > Sent: Thursday, February 11, 1999 12:41 PM
> > > > To:   'MIDRANGE-L@midrange.com'
> > > > Subject:      RE: subfile processing--readc & sflnxtchg
> > > >
> > > > Yes, I know, but he said "...but even with SFLNXTCHG, these
> > records are
> > > > only
> > > > retrieved once prior to the next EXFMT."  This implies he has
> > examples
> > > > where
> > > > setting on SFLNXTCHG does not force READC to pick up the records
> > during a
> > > > second pass unless another EXFMT is executed.  Did I
> > misunderstand, Bob?
> > > >
> > > > Donald R. Fisher, III
> > > > Senior Programmer/Analyst
> > > > Heilig-Meyers Furniture Company
> > > > (804) 784-7500 ext. 2124
> > > > Don.Fisher@HeiligMeyers.com
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Stone, Brad V (PP) [mailto:bvstone@ppress-tc.com]
> > > > Sent: Thursday, February 11, 1999 11:42 AM
> > > > To: 'MIDRANGE-L@midrange.com'
> > > > Subject: RE: subfile processing--readc & sflnxtchg
> > > >
> > > >
> > > > He is referring to trying to do two passes on the subfile before
> > writing
> > > > again.  Once you've read the changed records, they are no longer
> > changed.
> > > > You could use an indicator on the SFLNXTCHG keyword and be sure to
> > set it
> > > > on
> > > > and update the subfile after each READC.  I'm sure there are other
> > methods
> > > > as well.
> > > >
> > > > Bradley V. Stone
> > > > Taylor Corporation - OASIS Programmer/Analyst
> > > > bvstone@taylorcorp.com
> > > >
> > > > +---
> > > > | This is the Midrange System Mailing List!
> > > > | To submit a new message, send your mail to
> > MIDRANGE-L@midrange.com.
> > > > | To subscribe to this list send email to
> > MIDRANGE-L-SUB@midrange.com.
> > > > | To unsubscribe from this list send email to
> > > > MIDRANGE-L-UNSUB@midrange.com.
> > > > | Questions should be directed to the list owner/operator:
> > > > david@midrange.com
> > > > +---
> > > +---
> > > | This is the Midrange System Mailing List!
> > > | To submit a new message, send your mail to
> > MIDRANGE-L@midrange.com.
> > > | To subscribe to this list send email to
> > MIDRANGE-L-SUB@midrange.com.
> > > | To unsubscribe from this list send email to
> > MIDRANGE-L-UNSUB@midrange.com.
> > > | Questions should be directed to the list owner/operator:
> > david@midrange.com
> > > +---
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> > MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> > david@midrange.com
> > +---
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---